Installs (with Pics)
#17
Beach,
Car looks great! I'm planning on installing my Brembo rotors and painting my calipers someday...but I need to get my hands on a manual to do it. As far as the exhaust goes, was there any performance improvement? I have a K&N panel filter, but no exhaust.
Car looks great! I'm planning on installing my Brembo rotors and painting my calipers someday...but I need to get my hands on a manual to do it. As far as the exhaust goes, was there any performance improvement? I have a K&N panel filter, but no exhaust.
#18
Originally posted by ISC5
Beach,
Car looks great! I'm planning on installing my Brembo rotors and painting my calipers someday...but I need to get my hands on a manual to do it. As far as the exhaust goes, was there any performance improvement? I have a K&N panel filter, but no exhaust.
Beach,
Car looks great! I'm planning on installing my Brembo rotors and painting my calipers someday...but I need to get my hands on a manual to do it. As far as the exhaust goes, was there any performance improvement? I have a K&N panel filter, but no exhaust.
The Tanabe exhaust kicks ***.
#24
Originally posted by LCA575
Where is the SAFC install?
Where is the SAFC install?
The rest of the install was just running the wires down the lint tray and through the upper console.
Wad up with the Gen 6 DDE's, J?
Last edited by Beachtyme; 11-10-04 at 05:32 AM.
#25
Pole Position
Join Date: Jul 2002
Location: Relocated from NO to ATL
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
If you can email me the pics of the connections that would be great AdvanAutoCo@aol.com
I installed mine and there is something wrong, I checked the wiring multiple times and can't seem to find the problem. I have installed AFCs and Piggybacks before on other cars so I don't know if its a mistake on my part or there is just something I am overlooking. After you installed yours and did the initial setup it started and ran normally?
Here the setup I used:
Firewire
4 in 4 out
1 in 1 out
6 (arrow up and right)
I didn't fool with any other settings but the car starts, idles roughly, bogs down when the throttle is depressed, then will just die.
Let me know if you have any advise!
Anyways, the Gen-6 V.2 IS300 Demon Eyes are in stock, I had alot of people waiting on them (and tons of installs to do) sorry I didn't get back to you about it sooner.
Perhaps you can do an Install with pics
I installed mine and there is something wrong, I checked the wiring multiple times and can't seem to find the problem. I have installed AFCs and Piggybacks before on other cars so I don't know if its a mistake on my part or there is just something I am overlooking. After you installed yours and did the initial setup it started and ran normally?
Here the setup I used:
Firewire
4 in 4 out
1 in 1 out
6 (arrow up and right)
I didn't fool with any other settings but the car starts, idles roughly, bogs down when the throttle is depressed, then will just die.
Let me know if you have any advise!
Anyways, the Gen-6 V.2 IS300 Demon Eyes are in stock, I had alot of people waiting on them (and tons of installs to do) sorry I didn't get back to you about it sooner.
Perhaps you can do an Install with pics
Last edited by LCA575; 11-10-04 at 08:04 AM.
#26
J,
I saw your post at .NET (http://www.is300.net/forums/showthre...highlight=safc) and you seem to have the basic settings correct.
I will check mine and let you know. I used the wiring diagram and instructions that webmaster posted on there and everything is fine.
Right now, my SAFC is detuned and is really only functioning as a monitor. I got a CEL right after having it tuned and undid everything to get rid of the CEL, which it did.
Also, I will shoot you a PM or give you a call on the DDE's, I am ready to do the mod.
I saw your post at .NET (http://www.is300.net/forums/showthre...highlight=safc) and you seem to have the basic settings correct.
I will check mine and let you know. I used the wiring diagram and instructions that webmaster posted on there and everything is fine.
Right now, my SAFC is detuned and is really only functioning as a monitor. I got a CEL right after having it tuned and undid everything to get rid of the CEL, which it did.
Also, I will shoot you a PM or give you a call on the DDE's, I am ready to do the mod.
#27
I'm guessing
Those headers will give you approximately 18 additional horsepower. Overall It look's beautiful. Congratulations on a job well done.
Last edited by 70-101; 01-17-05 at 07:43 PM.
#29
Originally Posted by Taks_is300
i was just curiousi noticed that the new header had places for the 02 sensor but no cat/precat i was wondering did your check engine light ever come on????
^^^ That's the work around for the CEL from the header install.