Rickna

iTrader: (3)

Yes, those are the ones I ordered.

Alizia

iTrader: (1)

So I'm reviving a 2 year old thread here cuz I just started planning on doing this myself. For the front turn signal LEDs that is. I've got a new IS-F because I hit a deer with my 1st one. I currently have a 2012, so from my understanding there are 2 turn signal bulbs for each side and I need a "flasher".

My questions are... will I need 4 flashers or two? for the front turn lights.

The lights I'm looking into buying are:
https://www.superbrightleds.com/more...Specifications
or
https://www.superbrightleds.com/more...ll_accessories

the first ones I linked are way brighter but say "oversized" have no idea if they'll fit or not.

And here's a pic of 78 works taillights installed on my car to contribute to the conversation, I didn't know the picture was side-ways until I uploaded it and... I'm lazy

Evil Teo

iTrader: (13)

do you mean the flasher relay or the resistors? if the relay you only need one to stop the hyper blink. for resistors i think you will need four...not sure if i am correct on that but hopefully someone can chime in on the resistors. but yea only 1 flasher relay.

Alizia

iTrader: (1)

Talking about the LED turn signal flasher that I'm reading that we need due to hyper flashing without one:
http://www.diodedynamics.com/store/2...signal-flasher

Rickna

iTrader: (3)

If you change the flasher relay you don't need resistors.

Evil Teo

iTrader: (13)

the link you have is a flasher relay. u only need 1.

Alizia

iTrader: (1)

Thanks for the reply guys! I'll be sure to post some vid once I get them in.

JPxMODz

iTrader: (3)

On a side note. I've read so many posts in various forums where guys try to remove the stock relay, when all you need to do is unplug the harness from the stock relay and plug it into the new relay. Zip tie it into place and done. At least that's all I've ever done to eliminate hyper flash on every car I've owned