yjk1975

Looks great. Sounds kind of complicated.

Rickna

iTrader: (3)

Not at all. It's simply a PnP relay swap.

Raybean

iTrader: (3)

look great. i might look into getting red ones

Dupshaw123

I am interest in this mod BUT…...I have heard of people having issue with the LED lights not responding when you press the lock and unlock button when the car is parked. Can anyone report on this? Thanks

justjosh

iTrader: (5)

My lights still flash when I lock and unlock the car.

Rickna

iTrader: (3)

No issues here either.

Beachtyme

iTrader: (1)

Nice, I like the LED look for the turn signals.

Are the LED part #'s the same for front and rear amber blinkers?

justjosh

iTrader: (5)

Both front and rear turn signals use 7440 bulbs.

usa5655

iTrader: (1)

looking great ! im waiting for my LED turn signals from IJDMTOY

Beachtyme

iTrader: (1)

The rears were easy enough, any tips on doing the front turn signal bulbs?

It appears that the bulb inserts from the bottom in to the headlight housing.

prada_g

iTrader: (9)

The front bumper has to come off to change the front turn signal bulbs....I tried to reach through the fender liner when doing mine but the bumper support was in the way .

Beachtyme

iTrader: (1)

Thanks for the info, looks like I won't be changing the fronts out any time soon.

Edit: Forgot to add that the rear LED's are a nice improvement. My reverse LED's weren't working, I had to pull them and expand the wire on the LED base a bit for them to make good contact.

They light up now, very bright over stock. I still have an image of a very bright white LED in my line of vision.

Rickna

iTrader: (3)

I will be doing the front signals soon. I have to remove the front bumper to install laser shifters anyway, I'd like to do everything at once. The rear signals, reverse & bumper lights I did a few months ago.

justjosh

iTrader: (5)

I got my front turn signal LED bulbs in the other day and I will be taking off the front bumper tomorrow to install them. I will post a video after I get them installed.

OutCaster

iTrader: (1)

seems like if you get this one: http://store.ijdmtoy.com/No-Hyper-Fl...s-p/20-001.htm the led flasher is built in and you don't need a separate module to prevent hyper blinking?