iPod mod
#20
Driver
Thread Starter
Join Date: Nov 2013
Location: TEXAS
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
You have an iPhone 6 or 6+ by chance. It could be done really nice with something like this.
http://www.soundmanca.com/products/p...ide-slider-kit
http://www.soundmanca.com/products/p...ide-slider-kit
#21
Lexus Test Driver
iTrader: (3)
You have an iPhone 6 or 6+ by chance. It could be done really nice with something like this.
http://www.soundmanca.com/products/p...ide-slider-kit
http://www.soundmanca.com/products/p...ide-slider-kit
#23
You have an iPhone 6 or 6+ by chance. It could be done really nice with something like this.
http://www.soundmanca.com/products/p...ide-slider-kit
http://www.soundmanca.com/products/p...ide-slider-kit
#24
Pole Position
So H60Driver, you absolutely inspired me and I decided to take a stab at this myself. Hands down one of the coolest personal touches I can think to do to our cars. Well done at being the first (at least that I'm aware of) to do this; at least making a custom one anyway. The only differences for mine were that it was made for an iPod touch and I wrapped it in black suede to try and match the inside of the console as much as possible. Thanks again for the inspiration
Rough-cut (before sanding & finishing) / test fit immediately after it started taking shape. The cutout at the bottom is to help with getting the device out (push down and the top pops up). Inspired by the other link/suggestion H60Driver posted.
Pic without and with device in place
In place and powered off
In place and powered on
Just like H60Driver's this can be slid forward and back so the cup holder is still accessible and usable - I didn't want to lose mine either
Rough-cut (before sanding & finishing) / test fit immediately after it started taking shape. The cutout at the bottom is to help with getting the device out (push down and the top pops up). Inspired by the other link/suggestion H60Driver posted.
Pic without and with device in place
In place and powered off
In place and powered on
Just like H60Driver's this can be slid forward and back so the cup holder is still accessible and usable - I didn't want to lose mine either
#26
Pole Position
Thread
Thread Starter
Forum
Replies
Last Post
hypervish
RX - 1st Gen (1999-2003)
114
01-20-20 06:39 AM
sw2oboi
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
6
10-20-15 09:16 PM