MK4Sup_isF

iTrader: (10)

I went to European Auto Source, EAS in Anaheim, today to dyno my car before testing out the Vivid Racing tune. EAS is very big in the BMW M community that dyno many M cars. I'm curious on how my numbers vs the M3/4 on the same dyno. Darron tagged along to check out my car on the dyno and he got the itch so he put his car on the dyno too for numbers. GoPro video to come

My car, 08 107k miles with Meisterschaft exhaust and Sikky headers. Light weight two pieces Racing Brake rotors and TE37 19x10.5 wheels if that matters. Here are the numbers my car pulled. 4th run, the last run, gave the best numbers actually. The car seemed to pull harder and harder after each run, and the dyno numbers backed it up. Run 4 was imidiately after run 3 so there is no cooling down period in between.
DYNOJET 91 oct California fuel
4th run, 404whp 382wtq







Darron's car number
Mods, Sikky headers and Joe Z exhaust

Meraki Autoworks

iTrader: (8)

Next up... tune results + possibly race gas ?

ernestfyu

iTrader: (6)

Looking forward to the results! Thank you for trying this out despite of all the pessimism regarding the product.

I8ABMR

very solid numbers. As one of the pessimistic members I thank you too. Thats very cool of you to pioneer for the community. Wether it works or not , you are cool in my book bro.

ISFpat

iTrader: (10)

Your car gained an extra 10whp over Darrons because you have a vented hood. lol

juanmedina

very nice. Thanks for doing the test.

Mrd916

U should have found an M3 with a 107k miles on it to dyno along with ur car. Oh wait, a running M3 with 107k miles is like finding Bigfoot riding a unicorn on the back of the loch ness monster.

Joe Z

iTrader: (10)

Great numbers for both cars..!!!

Safely can say both are in the neighborhood of 400 horses to the wheels.

Loving the Torque numbers ....


Joe Z

flowrider

iTrader: (9)

Nice numbers. For comparison, here's two ISFs with PPE headers. Mine with HiFlow Cats and PPEs Dual Mode exhaust produced close to 393HP the other F also has PPE headers, the JoeZ exhaust and no cats produced just over 399 HP. Torque, however, was in the 365 to 370 lb ft range.

Lou

Meraki Autoworks

iTrader: (8)

hoods open during dyno runs, if you weren't being sarcastic.

ISFpat

iTrader: (10)

I was sarcastic.. lol

Vervish

iTrader: (4)

Thanks for doing this..best of luck with the tune.

Please keep us posted on what the butt dyno registers post tune.

Need4Speed

Good number's and thanks' for sharing the information..

F_Throttle

LOL. This one hurts.

AZ JB

iTrader: (1)

INNNNNN FOR THISSSSS... Can't wait for the results!