I8ABMR

These stupid things keep popping out because the dealership keeps putting the ones that go under the hood into the holes that hold the body rocker panel. Anyone have the correct part number or link to the correct clips. So far this is what I have found. Thanks for your help i advance fellas !

https://www.amazon.com/Nylon-Panel-R...00VFT7R0Q?th=1

j3ff

Hey. I believe this is the part #7692347010 which I referenced from http://www.lexuspartsdirect.ca/p/Lex...692347010.html

Otherwise here's another link to a variety of clips..There's quite a few so I'm not sure which ones you need; there's photos of each location if that helps. http://www.lexuspartsdirect.ca/produ...er+panel+clips

I8ABMR

Thanks buddy.I really appreciate it. I keep coming up with 75867-30120, 75867-30130, and 75867-30110. Not sure so I bought them all. They are pretty cheap and seeing that they constantly fall out it will be good to have extras.

j3ff

I'm leaning towards 30110 or 30. 30120 looks like the ones from the engine bay. Good idea buying them all though. They're probably falling out from driving too fast at the track you know.. only half kidding .

I8ABMR

Honestly I have replaced like 6 of them in the last 2 years and they keep falling out. Considering the bags of 20 cost like $8.50 I figured why not get them all. I can always bring some to C&C and offer them to the rest of the local F'ers. Im 99% sure if you guys look at your sidesill/rockers/ whatever they are call ed, you will be missing multiple from each side........unless its the 140 mph sprints I do on the regular

flowrider

iTrader: (9)

See this thread:

https://www.clublexus.com/forums/is-...de-skirts.html

Lou

lobuxracer

iTrader: (2)

75867-30120
Buy them here:
http://www.clipsandfasteners.com/Lex...r_p/a21123.htm.
https://autofastenersandclips.com/pr...er-black-nylon
http://216.38.6.33/product10420.html


Less than a buck each.

P/N is Au-ve-co 21123 if you want to find them somewhere else. Some cheaper on eBay too but you are ordering from Hong Kong.

flowrider

iTrader: (9)

^^^^Lance if you looked at the link I posted above:

http://www.lexuspartsnow.com/parts/l...867-30130.html

I think PN75867-30120 is incorrect.

Lou

808newbie

i do believe it is PN75867-30120 see pic below. thats what the dealer gave me and it fits.
OP see pic if this is what clip you are talking about.

edit: Lou nvm i dont know if there is a difference between 30120 and 30130 but yeah the pn you provided is rocker panel clips as well. interesting
just had to provide a pic to show what they gave me though

I8ABMR

YUP its the 20 part. The 10 and 30 were wrong.

lobuxracer

iTrader: (2)

I have all three - I have a whole stash of push pins for Lexus, Toyota, and Scion. The 20 part is the right one for the rocker panels and the rear wheel flaps. I paid $7.45 for the first one I bought from the local Lexus dealer. Never again. I have 20 of them on hand right now, bought from clipsnfasteners.com. I also have the correct pins for the underhood covers (there are two different ones for them) and the bumper cover. I always cross check the part numbers with my online EPC resource as well. I am absolutely certain Lexus specifies the 20 part for the rocker panels in the position we're talking about. Not only that, but I found an even cheaper source just now (25 for $5) with better pictures than anyone else: https://italfasteners.com/product/25...a-75867-30120/


The 30 part is also used on the rocker panels, but looks like this:

flowrider

iTrader: (9)

Ok, I had to replace both my rockers (side skirts) due to something incredibly stupid I did - I drove over my ramps And as I said in the link I listed above My body shop used the 30 PN.

Lou

lobuxracer

iTrader: (2)

Sounds like the 30s broke and the 20s were salvageable. Both are required for the rocker panels. The 30 goes on the inside and the 20 goes up from underneath.

doodles714

iTrader: (1)

Rickna

iTrader: (3)

These are for the trunk lining.