failed illinois emissions with headers and O2 sims?
#16
Racer
iTrader: (2)
Hopefully it will all work out for you! Let us know.
For what its worth, I had full long tube headers, catless and full exhaust on my 6.0L GTO and went to the Lincolnshire location and passed without issue...the place was filling up with gas fumes too....I had the rear 02's removed from the ECU, and they said NOT READY and it passed without issue....hmmm
For what its worth, I had full long tube headers, catless and full exhaust on my 6.0L GTO and went to the Lincolnshire location and passed without issue...the place was filling up with gas fumes too....I had the rear 02's removed from the ECU, and they said NOT READY and it passed without issue....hmmm
#17
Instructor
Thread Starter
Yeah he mentioned, oh that sounds good when he fired it back up. Haha. Will let ya know when I get it done for sure. Also what year was that with the goat?
#21
Instructor
Thread Starter
haven't had time to make it back yet. I have to go in the next two weeks as I will be in costa rica the last week of august and the 31st my tags expire.
#23
Instructor
Thread Starter
ok so where do I go to find the techstream device? I went back to my wrench and he is still showing that the O2 sensors and O2 heat sensor is still incomplete. I have put over 500 miles on the car since I last took it in for the emissions test. I'm a tad confussed with this so any help is welcome.
#24
techstrem device = dealer tech
according to their link it's only $5799
https://techinfo.toyota.com/techInfo...sheettinfo.pdf
find a new testing facility may be an easier option.
according to their link it's only $5799
https://techinfo.toyota.com/techInfo...sheettinfo.pdf
find a new testing facility may be an easier option.
#25
Instructor
Thread Starter
should I hit up the dealer for this and have them do this?
#26
You can buy a copy of it off ebay with cable. I would NOT use it for flashing the ECU / etc. I would only use it for changing settings / reading sensors. Mine works well. I used this install guide http://www.toyota-4runner.org/genera...-8-64-bit.html to get it to work on a 64bit PC.
#27
Instructor
Thread Starter
I don't exactly feel that I'm up to fixing this myself using that and my PC. Are there any other options out there?
Last edited by BS ISF; 08-13-14 at 02:22 PM.
#28
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
ok so where do I go to find the techstream device? I went back to my wrench and he is still showing that the O2 sensors and O2 heat sensor is still incomplete. I have put over 500 miles on the car since I last took it in for the emissions test. I'm a tad confussed with this so any help is welcome.
~ Joe Z
#29
Instructor
Thread Starter
I'm going to have one more tech take a look at this then I will be talking with sikky about replacing the two sims.
#30
Instructor
Thread Starter
update: did the drive cycle and still nothing. so I'm sending the sim's and module to sikky for inspection and hopefully an answer. have to go get an extension on my emissions tomorrow so that should be fun. will report back in about 10 days when I get back from vacation.