Brake question
06-19-14, 07:23 PM
#1
Brake question
I've done my brakes now for the second time, both times using OEM parts. The first time I had them done, the brakes had high stopping power, that bite you get from slightly touching the brakes, I loved it. I just had them done again and don't have that bite. I need to apply more pressure to stop the car. I've flushed my brake lines as well using OEM fluid. With both brake changes, I didn't bed them in. I'm feeling inclined to head out and give it a shot but I didn't need to the first time so what gives?
06-19-14, 07:46 PM
#2
Tech Info Resource
iTrader: (2)
Are they the same make and model of pads? If they're the same, they should not need bedding. Are you confident they removed all grease, oil, and fingerprints from the rotors and pads when the install was done? It's pretty easy to make a mistake and get the magic copper goop in a place where it should not be.
If you changed to a different brand or model of pads, you'll need to bed them in before they'll work well. Sometimes you'll even need to take garnet paper to the rotors to scuff off the old pad material.
If you changed to a different brand or model of pads, you'll need to bed them in before they'll work well. Sometimes you'll even need to take garnet paper to the rotors to scuff off the old pad material.
06-19-14, 07:53 PM
#3
Are they the same make and model of pads? If they're the same, they should not need bedding. Are you confident they removed all grease, oil, and fingerprints from the rotors and pads when the install was done? It's pretty easy to make a mistake and get the magic copper goop in a place where it should not be.
If you changed to a different brand or model of pads, you'll need to bed them in before they'll work well. Sometimes you'll even need to take garnet paper to the rotors to scuff off the old pad material.
If you changed to a different brand or model of pads, you'll need to bed them in before they'll work well. Sometimes you'll even need to take garnet paper to the rotors to scuff off the old pad material.
06-19-14, 07:54 PM
#4
Tech Info Resource
iTrader: (2)
Maybe. I'd do the brake cleaner and bed them in to be certain.
OEM pads are not Brembo. They're Jurid. It's possible they've changed manufacturers over the years.
OEM pads are not Brembo. They're Jurid. It's possible they've changed manufacturers over the years.
Last edited by lobuxracer; 06-19-14 at 07:58 PM.
06-19-14, 08:08 PM
#6
Tech Info Resource
iTrader: (2)
None of the ones I have seen say Brembo. They all say Jurid. Jurid is one of the largest OEM pad companies. 1 in 3 cars had Jurid pads from the factory.
EPC describes them this way:
04465-0W120 MARK JURID 655-GF
Interestingly enough, a Google image search shows a set of pads with Brembo stenciled on them in white paint. Unfortunately, Jurid 655 GF is stamped in the metal backing plate, so Brembo's paint job is clearly a rebranding effort.
EPC describes them this way:
04465-0W120 MARK JURID 655-GF
Interestingly enough, a Google image search shows a set of pads with Brembo stenciled on them in white paint. Unfortunately, Jurid 655 GF is stamped in the metal backing plate, so Brembo's paint job is clearly a rebranding effort.
Last edited by lobuxracer; 06-19-14 at 08:21 PM.
06-19-14, 08:36 PM
#7
This is exactly what I got. Doesnt matter front pads, rear pads all say brembo. All bought from sewels
And a link to a set for sale. http://www.lexusfforum.com/forums/at...0&d=1342116389
And a link to a set for sale. http://www.lexusfforum.com/forums/at...0&d=1342116389
Last edited by Compthis; 06-19-14 at 08:44 PM.
Trending Topics
06-19-14, 08:58 PM
#8
Tech Info Resource
iTrader: (2)
Look right above the silk screening where JURID is stamped into the backing plate. Case closed.
06-19-14, 09:42 PM
#9
Off topic, but I changed my front rotors and pads 5k miles ago. It's time to change my rear rotors and pads, but I'm wondering whether the bed in procedure would be the same as when I changed the front. I know most of the braking power comes from the front, so I'm not sure if I have to do the same amount of stops, or whether bedding in would be necessary. The rotor brand is Raybesto, with stop tech pads.
