Go Back   Club Lexus Forums > Lexus Model Forums > IS Models > IS F
Sign in using an external account
Register Forgot Password?


How can I access this button

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 04-22-14, 01:22 AM   #1
Defratos
Lead Lap
Trader Score: (0)
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 676
Question How can I access this button

Hi guys,

So I want to install my Apexi throttle controller.

The only free button I have is pictured below in red.

Now how the hell do I access this? I removed the cover at the bottom of the steering column (where the OBD plugs into which is just under the airbag for your knees)

But I still cannot get access to the button. Do I have to remove the whole plastic tray under the steering wheel? if so how does it come off? do I just yank it off? because I can't see any obvious screws that hold it in place.



Also how does the button come out? do I just pop it out?
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
__________________
2013 IS-F | Mercury Grey (1H9) | Red Leather Interior | PPE Headers | Tints | 3M Protective Film | Gloss Black Exhaust Tips | CF/ Flat bottom Steering wheel | PC'd Callipers | Project Mu pads | Black Pearl Emblems | Black Grille Surround | Joe-Z Intake | aFe Filter | Apexi TC | http://www.clublexus.com/forums/is-f...isf-build.html
Defratos is offline   Reply With Quote
Old 04-22-14, 01:43 AM   #2
Defratos
Lead Lap
Trader Score: (0)
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 676
Default

So I've tried to make this easier to understand.

From Sewell's page I have highlight the part that I think I need to remove.

But now it's a question on how to remove it? do I just yank it out? or are there any screws that I have to remove?

From the below diagram it seems like there is 1 screw (Numbered 5) and 1 clip (Numbered 3) but how do I access this?

__________________
2013 IS-F | Mercury Grey (1H9) | Red Leather Interior | PPE Headers | Tints | 3M Protective Film | Gloss Black Exhaust Tips | CF/ Flat bottom Steering wheel | PC'd Callipers | Project Mu pads | Black Pearl Emblems | Black Grille Surround | Joe-Z Intake | aFe Filter | Apexi TC | http://www.clublexus.com/forums/is-f...isf-build.html

Last edited by Defratos; 04-22-14 at 01:54 AM..
Defratos is offline   Reply With Quote
Old 04-22-14, 02:59 AM   #3
Boma
Lead Lap
Trader Score: (4)
 
Boma's Avatar
 
Join Date: Aug 2012
Location: Va
Posts: 480
UltraPandaX
Default

I could be wrong but I believe the plastic surrounding the buttons can be pried off. Use a plastic pry tool or something similar.

Edit: judging from the diagram it may not be able to be removed in that fashion. You may have to dismantle the dash.

Check here for a simplified explanation how to reach that area. It's for installing the Tom's start button but it is in that same vicinity as the area you're trying to reach. Good luck.

Last edited by Boma; 04-22-14 at 03:10 AM..
Boma is offline   Reply With Quote
Old 04-22-14, 04:12 AM   #4
hahahaf
Lead Lap
Trader Score: (2)
 
hahahaf's Avatar
 
Join Date: Jul 2009
Location: on
Posts: 681
Default

believe that part just pulls down. find the flasher relay install in the led headlamp retrofit thread
__________________
Lexus ISF Ultrasonic/Alpine
hahahaf is online now   Reply With Quote
Old 04-22-14, 05:50 AM   #5
mikellucci
Lead Lap
Trader Score: (47)
 
mikellucci's Avatar
 
Join Date: Nov 2005
Location: Ohio
Posts: 755
Default

You can pull away the entire dash piece as it's held only by clips. Then simply pop the blank cover off from behind.
__________________
IS350 062 Supercharged @ 372 whp
Pending Build~
' Brembo GT BBK 380f 355r ' OS Giken ' Volk CE28n ' CF DS ' Tom's ' Arkym ' Rotrex ' MapEcu3 ' BCR '
v8 swap SOLD


IS3 2JZ-GTE VVT-i
-Final tear down SOLD-
mikellucci is offline   Reply With Quote
Old 04-22-14, 06:26 AM   #6
Defratos
Lead Lap
Trader Score: (0)
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 676
Default

I'll try and just pull it away and see if it comes loose.

Thanks for the help guys
__________________
2013 IS-F | Mercury Grey (1H9) | Red Leather Interior | PPE Headers | Tints | 3M Protective Film | Gloss Black Exhaust Tips | CF/ Flat bottom Steering wheel | PC'd Callipers | Project Mu pads | Black Pearl Emblems | Black Grille Surround | Joe-Z Intake | aFe Filter | Apexi TC | http://www.clublexus.com/forums/is-f...isf-build.html
Defratos is offline   Reply With Quote
Old 04-23-14, 01:06 PM   #7
4everkidd
Lead Lap
Trader Score: (1)
 
Join Date: Mar 2011
Location: Alberta
Posts: 479
Default

pull off the dash cover parallel to the drivers door and then simply pull the dash piece off starting from the drivers side. The entire trim piece under the steering wheel, with both button panels comes off in one piece. there are about 8 wires to unclip and you are good to go.
4everkidd is offline   Reply With Quote
Old 04-23-14, 02:28 PM   #8
Defratos
Lead Lap
Trader Score: (0)
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 676
Default

^ Wicked thanks for the help will try it this weekend
__________________
2013 IS-F | Mercury Grey (1H9) | Red Leather Interior | PPE Headers | Tints | 3M Protective Film | Gloss Black Exhaust Tips | CF/ Flat bottom Steering wheel | PC'd Callipers | Project Mu pads | Black Pearl Emblems | Black Grille Surround | Joe-Z Intake | aFe Filter | Apexi TC | http://www.clublexus.com/forums/is-f...isf-build.html
Defratos is offline   Reply With Quote
Old 04-24-14, 08:59 PM   #9
anAgent
Rookie
Trader Score: (0)
 
anAgent's Avatar
 
Join Date: Nov 2013
Location: mn
Posts: 50
Default

I put mine in that spot. Pulled the plastic guard from under the steering column. Hardest part was removing the panel that buts up to the door sill. The button pops out with little force. I drilled out the bottom of the button cover to make room for the connector and then taped it to it. I'll try to post pictures tomorrow, if that helps.
anAgent is offline   Reply With Quote
Old 04-25-14, 03:49 AM   #10
Defratos
Lead Lap
Trader Score: (0)
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 676
Default

^ Just took mine out and I can see why you had to drill a bit of the button cover, it's a bit tight.

If you can post pics I'd appreciate it.
__________________
2013 IS-F | Mercury Grey (1H9) | Red Leather Interior | PPE Headers | Tints | 3M Protective Film | Gloss Black Exhaust Tips | CF/ Flat bottom Steering wheel | PC'd Callipers | Project Mu pads | Black Pearl Emblems | Black Grille Surround | Joe-Z Intake | aFe Filter | Apexi TC | http://www.clublexus.com/forums/is-f...isf-build.html
Defratos is offline   Reply With Quote
Old 04-25-14, 06:50 AM   #11
anAgent
Rookie
Trader Score: (0)
 
anAgent's Avatar
 
Join Date: Nov 2013
Location: mn
Posts: 50
Default

Quote:
Originally Posted by Defratos View Post
^ Just took mine out and I can see why you had to drill a bit of the button cover, it's a bit tight.
If you can post pics I'd appreciate it.
As soon as I get home I'll get you that picture. Also, one thing to note about where you're going to mount it (and where I mounted it) as there's some pros and cons to it that I've found.

Pros: The LED is hidden behind the steering wheel so it's not in your face while driving.
Cons: It's very hard to make an adjustment while driving since you can't see what setting it's on.

Also, I'll give you a tip. Don't set it to "Red" mode with stability and traction control off just before doing a u-turn on a 2 lane road.... UNLESS you're in a nice open space to deal with the ensuing 180 that's going to happen.
anAgent is offline   Reply With Quote
Old 04-25-14, 04:53 PM   #12
anAgent
Rookie
Trader Score: (0)
 
anAgent's Avatar
 
Join Date: Nov 2013
Location: mn
Posts: 50
Default

Well, I took some pictures but not of everything out and it's really hard to snap a photo under there.

With that said, you should be able to easily figure out what screws need to come out to pull off the bottom plastic piece. I can't get the camera back far enough to get a clear picture.

Once you get it off, you'll want to discount this:
Click the image to open in full size.

To disconnect it, you'll need to do this:
Click the image to open in full size.

Last edited by anAgent; 04-25-14 at 04:57 PM..
anAgent is offline   Reply With Quote
Old 04-26-14, 02:48 AM   #13
Defratos
Lead Lap
Trader Score: (0)
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 676
Default

Quote:
Originally Posted by anAgent View Post
As soon as I get home I'll get you that picture. Also, one thing to note about where you're going to mount it (and where I mounted it) as there's some pros and cons to it that I've found.

Pros: The LED is hidden behind the steering wheel so it's not in your face while driving.
Cons: It's very hard to make an adjustment while driving since you can't see what setting it's on.

Also, I'll give you a tip. Don't set it to "Red" mode with stability and traction control off just before doing a u-turn on a 2 lane road.... UNLESS you're in a nice open space to deal with the ensuing 180 that's going to happen.
Thanks mate, I actually got around to installing mine yesterday, and I understand what you mean about the positioning of the button. I don't mind it tbh as it's stealthy'ish.

I had to use a dremel to make the hole big enough to fit the button.

As for setting the button to red and taking a turn...well I did that yesterday and sure enough I went sideways but controlled it quickly enough....was not expecting it to fish tail like that.

BTW what's supposed to be better throttle response? the red button or the purple button (Boost 2) just before the red one?



Thanks for the help
__________________
2013 IS-F | Mercury Grey (1H9) | Red Leather Interior | PPE Headers | Tints | 3M Protective Film | Gloss Black Exhaust Tips | CF/ Flat bottom Steering wheel | PC'd Callipers | Project Mu pads | Black Pearl Emblems | Black Grille Surround | Joe-Z Intake | aFe Filter | Apexi TC | http://www.clublexus.com/forums/is-f...isf-build.html

Last edited by Defratos; 04-26-14 at 04:22 AM..
Defratos is offline   Reply With Quote
Old 04-26-14, 08:23 AM   #14
anAgent
Rookie
Trader Score: (0)
 
anAgent's Avatar
 
Join Date: Nov 2013
Location: mn
Posts: 50
Default

This is linked from VIP Autosalon
Click the image to open in full size.
anAgent is offline   Reply With Quote
Old 04-26-14, 10:34 AM   #15
Defratos
Lead Lap
Trader Score: (0)
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 676
Default

Yeah I've seen that chart before but still doesn't really clearly tell you which is supposed to be more sensitive.

From the graphs alone it shoes that Boost mode 2 is more aggressive than Hi Throttle Mode, but from driving hi throttle mode is definitely more sensitive.
__________________
2013 IS-F | Mercury Grey (1H9) | Red Leather Interior | PPE Headers | Tints | 3M Protective Film | Gloss Black Exhaust Tips | CF/ Flat bottom Steering wheel | PC'd Callipers | Project Mu pads | Black Pearl Emblems | Black Grille Surround | Joe-Z Intake | aFe Filter | Apexi TC | http://www.clublexus.com/forums/is-f...isf-build.html
Defratos is offline   Reply With Quote
Old 04-26-14, 10:34 AM
 
 
 
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I access my ECU Defratos IS F 12 06-14-14 11:09 PM
Defratos ISF Build Defratos Build Threads 49 05-17-14 01:38 PM
Installation instructions for Headers Defratos IS F 4 09-30-13 01:46 PM
What am I doing wrong Defratos IS F 14 09-28-13 04:25 AM
Header & Exhaust questions Defratos IS F 17 06-18-13 04:12 PM

All times are GMT -7. The time now is 07:04 PM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info