2014 Lexus IS F - Official updates via Lexus Japan and USA
#122
Lexus Fanatic
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,446
Received 1,058 Likes
on
586 Posts
Had them installed by Tommy yesterday. I was thinking about clear bra before having them installed, but I was itching to get them on and see the output for myself. It is definitely an upgrade. Do you think a film would suffice, or would the housing have to be removed? The only problem is, my fogs are now brighter than my headlights. Changes to come...
Time for the new headlamp housings .
~ Joe Z
#123
That's what Tommy said too (about the headlights). I was thinking a lighter Optic Blue than the one Aerotect offered, but CHP nabbed me for that with the original fog lamp.
#125
Racer
Very nice, did you also change your Daylight driving lights? (first beam?)
#127
#128
#134
Moderator
iTrader: (7)
So I installed the driver's side first and without adjusting, it looked like it lined up with the stock one (1st picture). I also did not adjust the passenger side and both lined up. Drove and see how they work and they seem low. Correct me if I'm wrong, the round plastic cap on the fender liner is to access the adjustment ****? I really don't want to unscrew the liner screws again. Oh, both also fogged up on the bottom part but they are going away (2nd picture)
Edit: The caps are right below the fog lights so I'm confirming that we can adjust them through those holes.
Edit: The caps are right below the fog lights so I'm confirming that we can adjust them through those holes.
Last edited by JT2MA71; 12-17-13 at 05:35 AM.