Reaper21

iTrader: (1)

Looking to run the following square setup. Will they rub?? I'm pretty sure the rears will be fine, I'll probably add 5mm spacers too. I'm more concerned with the fronts. Thanks.

RAYS Gram Lights 57DR
18x9.5 +38 All around
255/35/18 Dunlop Direzza DZ101

Reaper21

iTrader: (1)

If the fronts don't fit I'll just go with the 8.5" with 225/40/18 up front.

Murph145

Yea that should fit as long as they clear the calipers. Y do u want a square set up.

4TehNguyen

iTrader: (1)

255 is way too wide for the front, 235 is probably the widest you can get for the fronts

MK4Sup_isF

iTrader: (10)

I'm on 19x10 +30 with 245 35 for my front and I still have plenty of room to go up to 255. You will be just fine. I have seen guys with 19x10 +33 on 255 for the front

Reaper21

iTrader: (1)

No reason other than I just like the concavity of the 9.5". I'm still not sure, I may end up going staggered with the 8.5 up front.

CalitriSC

iTrader: (13)

255s are an easy fit up front! I had 20x9.5s with 255s up front as well as 19x10 +33 up front with 255/35s and no issues. With 18s it will be even easier.

Murph145

^ yea nothing hard about 255s up front

CalitriSC

iTrader: (13)

^ No sir, i could have had 265s up front lol.

ilv1004s

iTrader: (8)

9.5 +38 is no problems with the guards

Reaper21

iTrader: (1)

What do you guys think about these specs being flush? And by flush I mean just straight even with the fender, no pokage or anything.

MK4Sup_isF

iTrader: (10)

it's depending on how low you are also, due to natural negative camber as you lower your car. You will be fine with 9.5 +38. I'm on 10 +30 front with -2.7 camber and my wheels sit pretty much flush. Guys rolling with 10 +25 poke slightly

MK4Sup_isF

iTrader: (10)

BTW, 255 35 18 tires will change your overall rolling diameter to 25.1", that is over 1" smaller than stock of 26.2". I don't think that is a goood idea. Suspension and ABS are going to be affected.

Reaper21

iTrader: (1)

Thanks for the info MK4 - I'm actually going to be swapping my suspension to BC coils. How is it going to affect the ABS?

I knew they are going to have a smaller diameter but I didn't really think that would be a problem for anything.

CalitriSC

iTrader: (13)

Pretty simple, get 255/40/18.