ilv1004s

iTrader: (8)

Been searching everwhere
cant find any info on aftermarket seat rails for the ISF
has anyone done this??
there has to be sumthing right?
can anyone point me in the right direction ?

NotnFsport

iTrader: (10)

QUOTE=demik;7415013]when i put my seats in the only light i got was the one in my cluster. i previously turned off the chime for the seat belt light prior to my after market seats. so iono if it will chime if u dont disable it. the harness for the seat belt is with the seat air bag harness and i didnt feel like taking all the wires of the OEM seats to plug it in. You can use is300 rails they fit. There are an additional 2 mounting holes on the rear 2 seat mounting point area. i like these seats better couse im a little skinny and the f seats are a little wide to me. hope this help. there is a kit or resistor u can buy , just been lazy to get it and the light doesnt bother me.


[/QUOTE]

ilv1004s

iTrader: (8)

ah thansk for that
so the is300 rails fit
i dont have to worry about warning lights and such
it's for our isf race car

LiLS

iTrader: (7)

the bride is300 rails is what we would need?

LexF

I'd like more info too

ToothDoc

What was the weight savings and do you ride a little lower now - I need an inch or two for helmet clearance. Also, if anybody has any info so I can drive around W/O the warning... This is my next mod.

DEMIK

iTrader: (18)

Yes i used bride rails from a IS300
Yezzzz suurrrrr,

not sure but a pretty decsent amount of wieght. ill wiegh the stock seats one day My setupe is pretty low, I'm 6ft and i can wear a helmet no problem with plenty of room.

trackdood

iTrader: (1)

I make rails for the ISF. solid bucket high mount seat bracket for cobra and recaro buckets. None sliders since sliders are not safe in racing application.

imdrax

to confirm, you were able to use is300 brackets on the ISF? And all the 4 mounting points lined up correctly?