beginning to now... lots of pics.
#33
Pole Position
iTrader: (1)
PPE headers are great. No problems with installation. Has a more raspy sound when revving now. Rear fenders were rolled with slight pull. Front fender tabs were modified.
19x9.5 +22 225/40
19x10.5 +22 255/35
Warning tho. These wheels will not fit very easily. Fenders were modified and rear camber was adjusted more negative for these sizes to fit. So these wheels are more for "looks" rather then function for the F.
19x9.5 +22 225/40
19x10.5 +22 255/35
Warning tho. These wheels will not fit very easily. Fenders were modified and rear camber was adjusted more negative for these sizes to fit. So these wheels are more for "looks" rather then function for the F.
#36
Driver School Candidate
Thread Starter
Join Date: Oct 2005
Location: HI
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Volks are pressed graphite
Adv1's are matte black
The factory toe adjustments were enough. In the beginning I didn't have enough camber and my wheel lip would kiss the fender once in awhile. Put a little more camber and it was fine. Rolled and pulled.
Tein coilovers
Adv1's are matte black
Hey i also have 9.5 +22 and 10.5 +22 were you able to get your toe close to stock, or did you have to buy the aftermarket toe arms as well? and with your rear camber kit are you able to tuck the wheel lip under the fender when you hit bumps? Are you rolled, and pulled in the rear? I shaved the rear before i new rolling was a better option
Tein coilovers
#37
Rookie
iTrader: (2)
Join Date: May 2009
Location: Washington
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, iPhone pics.
about a week after I bought her brand new, I had to lower her.
fitting some TE37SL's on 19x9.5 and 19.10.5
PPE headers with Borla cat-back
Tom's kit
ADV1's 19x10 and 19x11's
Grille was blacked out along with emblems about a week after purchased also. Swapped out pads for the Project Mu pads because of brake dust. Blacked out chrome trim around windows too.
about a week after I bought her brand new, I had to lower her.
fitting some TE37SL's on 19x9.5 and 19.10.5
PPE headers with Borla cat-back
Tom's kit
ADV1's 19x10 and 19x11's
Grille was blacked out along with emblems about a week after purchased also. Swapped out pads for the Project Mu pads because of brake dust. Blacked out chrome trim around windows too.
How did you black out the front is it paint?
#39
Wow, what a machine. I do agree with others that the TE's look best.
Too bad you have to have a narrower rear tire in order for it to fit under fender with negative camber. :/
Too bad you have to have a narrower rear tire in order for it to fit under fender with negative camber. :/
#44
Driver School Candidate
Thread Starter
Join Date: Oct 2005
Location: HI
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
#45
Driver School Candidate
Thread Starter
Join Date: Oct 2005
Location: HI
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Thanks