Where do you put the jackstands?
#32
Lexus Fanatic
iTrader: (9)
For me at least... the issue isn't jacking up the car (I have a low profile that can reach the stock jack points), but once the car is jacked up I have nowhere that the jack stands can safely go due to their shape.
This is exactly what we need so the jack stand can safely hold the car at the spot welds as per the lexus manual:
This was custom made, and I haven't found any product like this anywhere... (I found this on the mustang forums).
.
Last edited by GiantsFan; 10-12-12 at 11:56 PM.
#33
The Maker
iTrader: (11)
From reading this thread I don't think this solves the issue most of us have.
For me at least... the issue isn't jacking up the car (I have a low profile that can reach the stock jack points), but once the car is jacked up I have nowhere that the jack stands can safely go due to their shape.
This is exactly what we need so the jack stand can safely hold the car at the spot welds as per the lexus manual:
This was custom made, and I haven't found any product like this anywhere... (I found this on the mustang forums).
.
For me at least... the issue isn't jacking up the car (I have a low profile that can reach the stock jack points), but once the car is jacked up I have nowhere that the jack stands can safely go due to their shape.
This is exactly what we need so the jack stand can safely hold the car at the spot welds as per the lexus manual:
This was custom made, and I haven't found any product like this anywhere... (I found this on the mustang forums).
.
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
#37
Tech Info Resource
iTrader: (2)
^^+1. You don't need a lot of lift for an oil change.
#39
Tech Info Resource
iTrader: (2)
This is what I was +1 on. Those are the rear LCA bushing mounts, they're aluminum and I wouldn't put stands there unless I couldn't use the body seams. I always use the OEM jack points with my stands.
Thread
Thread Starter
Forum
Replies
Last Post