ULTSISF

iTrader: (2)

I'll be joining this thread soon!!!!

shyguyF

Do you like your front right now ?
With 8.5"+30 the front new wheels stick out 21.5mm compared to +45 of the stock.
If you like the front i think you should go with +36 on the rear.
If you want more flush you can take +31 on the rear but i"m not sure if it will rub, because some members here already had 9.5"+29 and it rubs when going over dips or bumps.

shahir18

iTrader: (2)

Ah, ok... I haven't installed my springs yet. I am trying to figure out what set of spacers to get for my oem 2012+ wheels which is the specs I posted

So with the specs suggested, 15mm spacers front and rear which would be 8.5" +30 / 9.5" +36 or with 15mm front and 20mm rear putting me at 8.5" +30 / 9.5" +31 (But the risk of rubbing)

Any Pics of the how any of those specs look? I tried to search but really didn't find much info and/or pics...

Thanks for your info and feedback - I might just end up with 15mm all around, was trying to see if it would be possible to push it out wider without the need of any fender modifications

Bigcloud

I have 275/30/19 RE-11's +32 in the rear and they rub on the drivers side a little even with a fender roll. I'm getting them rolled again to see if I can get it flatter so they will fit. I think that I may need more negative camber.

dabs

I have not seen anyone with Work VS-KF on their ISF.

Does any1 have any pics?

Meraki Autoworks

iTrader: (8)

hey guys, quick bump cause I have a question.. I'm running 19x10s +38 on a 255/275 tire but wanted to switch up to some lighter wheels, found these advans that are 19x9 and 19x10 +25 front and back. I was wondering if I could run this, im lowered on KW's and I'm rubbing on the front when Im reversing and crank the wheel to the right.. input

shyguyF

19x9 +25 is the same with 19x10 +38 for the front and you get more space of inner of the wheel.
19x10 +25 is 13mm stick out compared to 19x10 +38. Hope this help.

Biggu

iTrader: (12)

I tried to put my 18" VS-Kf on my ISF and they wouldn't even clear the brake because it was too tall.

ISFpat

iTrader: (10)

Do your math..

With 19x9+25 front's it'll have the same fitment in the front so youll still rub the same.

With 19x10+25 rears it will stick out 13mm out more than before. So add 13mm to your wheel and see if it fits, if not add more camber/pull your fenders/or raise your car

CalitriSC

iTrader: (13)

My TEs 9.5/10.5"

jdmSW20

iTrader: (12)

Mr MBN

DEMIK

iTrader: (18)

Utra Mr. MBN guy right here.

jkappel

anyone know the wheels that are in the last picture?


anyone know the wheels that are in the last picture?

ISFPOWER

iTrader: (20)

linea corse lc888

Bigcloud

I fixed my rubbing issue. I installed SPC rear camber arms. Added about .3 degrees of negative camber and she's all fine.