Aggressive fitment IS-F pics!
#751
#753
Driver School Candidate
Join Date: Feb 2009
Location: Ontario
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
So if +33 offsets require rolling, would 19x8.5 +35 in the front and 19x9.5 +38 in the back with stock tire sizes be ok without rolling?
#760
Wedssport SA55M 19x10 +43 Square
I love them so far. I do wish they were a little less aggressive so I could fit more tire. Right now I'm running a 255/265 setup. Going to try bump it up to 265/275 or 275 square next set of tires. Mild roll in the back. Currently running -2 camber front and -1 camber rear. Swift Springs.
I love them so far. I do wish they were a little less aggressive so I could fit more tire. Right now I'm running a 255/265 setup. Going to try bump it up to 265/275 or 275 square next set of tires. Mild roll in the back. Currently running -2 camber front and -1 camber rear. Swift Springs.
#761
Lexus Test Driver
iTrader: (3)
Wedssport SA55M 19x10 +43 Square
I love them so far. I do wish they were a little less aggressive so I could fit more tire. Right now I'm running a 255/265 setup. Going to try bump it up to 265/275 or 275 square next set of tires. Mild roll in the back. Currently running -2 camber front and -1 camber rear. Swift Springs.
I love them so far. I do wish they were a little less aggressive so I could fit more tire. Right now I'm running a 255/265 setup. Going to try bump it up to 265/275 or 275 square next set of tires. Mild roll in the back. Currently running -2 camber front and -1 camber rear. Swift Springs.
#762
Yeah. They are calling it Austin Yellow on the new ones. I'm not really a fan.
#763
Do you guys think I'll be OK with this fitment?
19x8.5 +20mm offset
19x10 +35mm offset
I'm currently running the specs below and if I calculated correctly, the stance should be very similar. As it sits, I feel like the front could poke another .25". All fenders are rolled.
19x9 +32mm offset
19x10.5 +39mm offset
19x8.5 +20mm offset
19x10 +35mm offset
I'm currently running the specs below and if I calculated correctly, the stance should be very similar. As it sits, I feel like the front could poke another .25". All fenders are rolled.
19x9 +32mm offset
19x10.5 +39mm offset
#764
Do you guys think I'll be OK with this fitment?
19x8.5 +20mm offset
19x10 +35mm offset
I'm currently running the specs below and if I calculated correctly, the stance should be very similar. As it sits, I feel like the front could poke another .25". All fenders are rolled.
19x9 +32mm offset
19x10.5 +39mm offset
19x8.5 +20mm offset
19x10 +35mm offset
I'm currently running the specs below and if I calculated correctly, the stance should be very similar. As it sits, I feel like the front could poke another .25". All fenders are rolled.
19x9 +32mm offset
19x10.5 +39mm offset
19x8.5 +22 front 235/35
19x9.5 +22 rear 255/35 (will go to maybe 265/30 later)
My fronts rub the inner lining when parking/full locking though. Those specs should sit relatively similar, if not less likely to rub on the rear if you stretch a bit on a 265/35 for example (or go 30 profile).
#765
Here's mine in final fitment form. Installed the coilovers, mega arms. Had it aligned, corner weighted & fiddled with the height for a week. I went for a functional alignment/spec, rather than all out stance.
-2deg front camber (SuperPro bushes)
-1.8deg rear camber (FIGS mega arms)
Fronts rub lining on full lock/parking
Rear rubs a bit with full passenger load
Handles likes a dream. Coilovers are 14F/12R, I've been playing with damper settings & am currently set at front 7 (from hardest) & rear 10 (from hardest). The ride quality is equal to my stock 2011 suspension. Tried a bit softer, which felt nice, but I prefer the handling at the slightly stiffer specs.
-2deg front camber (SuperPro bushes)
-1.8deg rear camber (FIGS mega arms)
Fronts rub lining on full lock/parking
Rear rubs a bit with full passenger load
Handles likes a dream. Coilovers are 14F/12R, I've been playing with damper settings & am currently set at front 7 (from hardest) & rear 10 (from hardest). The ride quality is equal to my stock 2011 suspension. Tried a bit softer, which felt nice, but I prefer the handling at the slightly stiffer specs.