Help installing Illuminated Door sills
04-14-09, 05:49 PM
#1
Pole Position
Thread Starter
iTrader: (2)
Join Date: May 2003
Location: Illinois
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Help installing Illuminated Door sills
i just got a pair of Blue Illuminated door sills ......can anyone recommend directions on how to install them?
04-14-09, 06:01 PM
#2
Grab it from the side and give it a nice tug, it'll pop out. Then just plug it in and snap them on that's it. Make sure your DOOR switch is turned on, or else it won't turn on. If you don't know what the DOOR switch is, look at where you sunroof switch is there's 2 buttons.
04-14-09, 06:19 PM
#3
Sorry, it is not quite that easy on the isf. (I think that you asked this question here before and got responses?) Here is the diy:
https://www.clublexus.com/forums/is-...ff-plates.html
https://www.clublexus.com/forums/is-...ff-plates.html
Trending Topics
04-15-09, 10:48 AM
#10
I did the install on CrazyMPG's IS-F. To make a long story short, I basically had to do some custom work to bring the lead that's on the driver side of the car over to the passenger side. There's a source on the passenger side, but when it's connected to the sill the polarity is reversed and would turn on when the door is closed and off when the door is opened. That's why I had to run them both off of the driver's side lead.
Javier
Javier
04-15-09, 12:47 PM
#11
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
The F's only come with Aluminum Sill plates ....
^^ You should have just flipped the connector..... 
I did the install on CrazyMPG's IS-F. To make a long story short, I basically had to do some custom work to bring the lead that's on the driver side of the car over to the passenger side. There's a source on the passenger side, but when it's connected to the sill the polarity is reversed and would turn on when the door is closed and off when the door is opened. That's why I had to run them both off of the driver's side lead.
Javier
Javier
04-15-09, 02:11 PM
#12
Lexus Fanatic
I did the install on CrazyMPG's IS-F. To make a long story short, I basically had to do some custom work to bring the lead that's on the driver side of the car over to the passenger side. There's a source on the passenger side, but when it's connected to the sill the polarity is reversed and would turn on when the door is closed and off when the door is opened. That's why I had to run them both off of the driver's side lead.
Javier
Javier
04-15-09, 02:42 PM
#15
I did the install on CrazyMPG's IS-F. To make a long story short, I basically had to do some custom work to bring the lead that's on the driver side of the car over to the passenger side. There's a source on the passenger side, but when it's connected to the sill the polarity is reversed and would turn on when the door is closed and off when the door is opened. That's why I had to run them both off of the driver's side lead.
Javier
Javier