When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I didn't know there were actual differences on my ISF but apparently so. Please school me where to get replace wipers for my 2008 Lexus ISF.
I had a 2011 Lexus IS250 and changed them with Michelin wipers from Costco. You pulled and snapped in. Simple.
I ordered the same design as the Michelin from Amazon, this time Bosch Clear Advantage for my ISF. And you know what? They don't snap in.The current set on the car has a hook/insert on the top that pushes down the wiper.
On my 2008 Lexus ISF, the wipers have the same design as this youtube video:
Had to buy new ones directly from Lexus after hail broke both of mine (~$40), they do just snap in you just have to work the hook into the wipers first then push in.
As others have mentioned, save your money and just buy the rubber inserts. Easy and quick install.
I have always bought the inserts for all of my vehicles over the years.
I've bought from myLparts.com (use CL discount):
Wiper Bade Right - Part Number: 8521253081
Wiper Blade Left - Part Number: 8522253071
*Refill is included with wiper blades
Wiper Refill Right - Part Number: 852140E140
Wiper Refill Left - Part Number: 852140T040
I've bought from myLparts.com (use CL discount):
Wiper Bade Right - Part Number: 8521253081
Wiper Blade Left - Part Number: 8522253071
*Refill is included with wiper blades
Wiper Refill Right - Part Number: 852140E140
Wiper Refill Left - Part Number: 852140T040
I find there is nothing better then going with what the oem has to offer as it was designed to work flawlessly right from the factory. Oem inserts is all you should be replacing.
I find there is nothing better then going with what the oem has to offer as it was designed to work flawlessly right from the factory. Oem inserts is all you should be replacing.
i replaced my OEM with rain X wipers before i knew about the inserts. i think i still have the OEMs in the garage that i will get new blades for and switch them back out.