Squared setup - will it fit?
#3
The front "should" be okay as well. You will probably get some rubbing in front depending on how low you are. You may have to raise it up a bit if it rubs too much. My track setup is squared 275/35R18s on a 18x9.5 +45 wheel. My particular 275s are actually as wide as some 295s and I don't have issues in the front and am lowered on coilovers.
Last edited by Gymkata; 10-24-16 at 09:30 PM.
#5
I would suspect the rears fit quite nicely, and many have used that same wheel/tire sizing. The fronts, knowing that they're lowered, will probably rub slightly at full lock and even on large dips. Otherwise, I don't believe they'll rub. I've seen 19x10 up front, and there was minimal rubbing on his 275/35.
#7
Driver
Thread Starter
Join Date: Jun 2009
Location: AZ
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the input but I decided against them because the package wasn't offering a better wheel than the factory set I still have. I've been trying to justify the $$$ for different wheels, requirements include lighter and stronger for track use, but haven't been able to find something that isn't multiple thousands and I like that much better than the factory wheels.
For now, I'm going with;
factory wheels
245/275 yoko AD08r tires
15 mm HR spacers
For now, I'm going with;
factory wheels
245/275 yoko AD08r tires
15 mm HR spacers
Trending Topics
#8
#9
Lexus Test Driver
iTrader: (1)
http://www.tsw.com/alloy_wheels_nurburgring.php
I'm considering those wheels for my track set-up... Or maybe the 18x9.5 version, which is a +40 offset.
-Mike
#10
Driver
Thread Starter
Join Date: Jun 2009
Location: AZ
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Rafi's wheels are 19x9.5 +41 offset.
http://www.tsw.com/alloy_wheels_nurburgring.php
I'm considering those wheels for my track set-up... Or maybe the 18x9.5 version, which is a +40 offset.
-Mike
http://www.tsw.com/alloy_wheels_nurburgring.php
I'm considering those wheels for my track set-up... Or maybe the 18x9.5 version, which is a +40 offset.
-Mike
Thread
Thread Starter
Forum
Replies
Last Post
i2fat
IS - 3rd Gen (2014-present)
18
06-23-15 10:35 AM