When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
thanks guys, i was actually leaning on to HPS.... but i need to hear it first
If you are retaining the stock air box all of the intake tubes are going to sound the same. It's a very basic elbow that has a slightly differant sound then stock, don't overthink this.
The HPS is best for combating IAT. During a dyno test that I did about 4-5 years back the Takada lost 4whp over stock and the iCode (same as HPS) with Afe filter gained 4whp on an otherwise stock engine.
I believe Figs has the HPS on sale.
I didn't like the quality of any aftermarket intakes for the ISF based on how much they cost, so I made my own and added -10 AN fitting so I could put a proper catch can/AOS setup on. Although I have no dyno results it doesn't differ much from other intakes on the market. Im happy enough knowing that no oil is sitting in the bottom of the intake manifold, I was surprised at how much accumulates in there.
07-06-16, 08:52 AM
