HELP!! CEL & VSC & TRACTION Light!!
#1
HELP!! CEL & VSC & TRACTION Light!!
hey CL! quick questions!
So i had my battery disconnected for over 20mins, and when i started the engine, it was perfectly running fine. but after few miles, CEL & VSC & Traction Lights came on!! does any one experience this? please let me know guys!
my mods are
PPE headers (cat less) had it for few months With no CEL at all
Joe-Z Cat back Exhaust
So i had my battery disconnected for over 20mins, and when i started the engine, it was perfectly running fine. but after few miles, CEL & VSC & Traction Lights came on!! does any one experience this? please let me know guys!
my mods are
PPE headers (cat less) had it for few months With no CEL at all
Joe-Z Cat back Exhaust
#6
Get that code checked! It will give you a much better idea of what triggered this event.
For reference, I recently had the CEL & VSC lights on after installing my exhaust (still running stock headers). When I ran the code it came up with a P0031 which lead to bank 1 sensor 1 (upstream O2 sensor in the drivers side header). The code only went away once I replaced the sensor.
For reference, I recently had the CEL & VSC lights on after installing my exhaust (still running stock headers). When I ran the code it came up with a P0031 which lead to bank 1 sensor 1 (upstream O2 sensor in the drivers side header). The code only went away once I replaced the sensor.
#8
Get that code checked! It will give you a much better idea of what triggered this event.
For reference, I recently had the CEL & VSC lights on after installing my exhaust (still running stock headers). When I ran the code it came up with a P0031 which lead to bank 1 sensor 1 (upstream O2 sensor in the drivers side header). The code only went away once I replaced the sensor.
For reference, I recently had the CEL & VSC lights on after installing my exhaust (still running stock headers). When I ran the code it came up with a P0031 which lead to bank 1 sensor 1 (upstream O2 sensor in the drivers side header). The code only went away once I replaced the sensor.
I see i should try to pull the codes first and see.. Hopefully nothing major
#11
Instructor
get the code!
#12
Don't worry about the VSC and Traction lights. Those come on anytime the CEL does. Like mentioned before, get the codes read and go from there. Autozone/etc will read them for you for free.
#15
A quick search of the forums says that's pointing to bank 1 sensor 1 (same sensor that was my problem). I'd take a look at the wire extensions on the drivers side header O2 and see if anything is loose or melting, first.