Forgot to mention.... I pulled the trigger.
#16
Lead Lap
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Sure thing, I paid 35k after tax/tags. If you are on the east coast, I know of an 08 in Charlotte, NC. $36k 25,980 miles. It appeared a week after I bought mine. I had to drive 4 hours past it!!! (I live in SC)
Everyone thanks so much! This might be redundant but Sikky headers and Joe-Z exhaust or the PPE headers???? Lol.
Everyone thanks so much! This might be redundant but Sikky headers and Joe-Z exhaust or the PPE headers???? Lol.
#21
Driver
Thread Starter
Join Date: Jan 2015
Location: SC
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
#22
Lead Lap
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
There isn't a recall on the water pump (although there should be since every freaking one likely has it) and the cooling fan and fuel sensor gasket should be open unless your car doesn't qualify for the sensor gasket one for some reason.
#23
Driver
Thread Starter
Join Date: Jan 2015
Location: SC
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Love owning a Lexus, cars are great, people are great.....
Thanks everyone.
#24
#27
Driver
Thread Starter
Join Date: Jan 2015
Location: SC
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
#28
#30
Lexus Champion
iTrader: (3)
Thanks.
Just returning the favour after someone here was kind enough to point out mine were on wrong!
Don't think tire shops appreciate our rims are directional.
To the op, you'll see there are flat blades and then a ridge on each spoke. These should match front and back.
Yours don't at the moment.
Should be ridge/flat as with the rears. Your fronts just need swapping round (passenger front on drivers side, drivers front on passenger side).
Hope that makes sense.
Just returning the favour after someone here was kind enough to point out mine were on wrong!
Don't think tire shops appreciate our rims are directional.
To the op, you'll see there are flat blades and then a ridge on each spoke. These should match front and back.
Yours don't at the moment.
Should be ridge/flat as with the rears. Your fronts just need swapping round (passenger front on drivers side, drivers front on passenger side).
Hope that makes sense.