Strange VSC/Brake/ABS light
11-18-14, 09:22 AM
#1
Strange VSC/Brake/ABS light
So guys, I've got the Check VSC message at first, then I got the brake/abs light, but those two lights only come on as the headlights come on. It's a weird problem, but anyone got any leads on it?
I did a few things over the weekend though.
1) Coilovers
2) GS front control arms
3) Rear SPC camber arms
4) LED front Turn signal bulbs
5) Rear LED Reflectors
6) Alignment
I know I did a bunch of stuff all at once, but I never removed the abs wires on the hub when doing the coilovers/arms, and it didn't rest on it.
But if it was an issue like that, I don't see why the dash lights would come on, until the headlights came on.
I did a few things over the weekend though.
1) Coilovers
2) GS front control arms
3) Rear SPC camber arms
4) LED front Turn signal bulbs
5) Rear LED Reflectors
6) Alignment
I know I did a bunch of stuff all at once, but I never removed the abs wires on the hub when doing the coilovers/arms, and it didn't rest on it.
But if it was an issue like that, I don't see why the dash lights would come on, until the headlights came on.
11-18-14, 02:44 PM
#4
Tech Info Resource
iTrader: (2)
Techstream is the only way.
11-18-14, 03:54 PM
#6
Tech Info Resource
iTrader: (2)
No idea. I don't use them.
Trending Topics
11-18-14, 05:03 PM
#8
Tech Info Resource
iTrader: (2)
There are people who have used them successfully. I can't comment because I have no experience with them.
11-19-14, 10:39 PM
#11
vsc brake abs
So guys, I've got the Check VSC message at first, then I got the brake/abs light, but those two lights only come on as the headlights come on. It's a weird problem, but anyone got any leads on it?
I did a few things over the weekend though.
1) Coilovers
2) GS front control arms
3) Rear SPC camber arms
4) LED front Turn signal bulbs
5) Rear LED Reflectors
6) Alignment
I know I did a bunch of stuff all at once, but I never removed the abs wires on the hub when doing the coilovers/arms, and it didn't rest on it.
But if it was an issue like that, I don't see why the dash lights would come on, until the headlights came on.
I did a few things over the weekend though.
1) Coilovers
2) GS front control arms
3) Rear SPC camber arms
4) LED front Turn signal bulbs
5) Rear LED Reflectors
6) Alignment
I know I did a bunch of stuff all at once, but I never removed the abs wires on the hub when doing the coilovers/arms, and it didn't rest on it.
But if it was an issue like that, I don't see why the dash lights would come on, until the headlights came on.
11-20-14, 06:46 PM
#13
For one who is interested the cable works out great.
I had a few pending engine codes, and quite a few abs codes
All speed sensors and yaw rate, had output low. Did the zero point calibration, cleared codes, changed the front led out, and new battery today. The battery had be doing the slow cranking, so I think the battery was the main culprit so far so good
I had a few pending engine codes, and quite a few abs codes
All speed sensors and yaw rate, had output low. Did the zero point calibration, cleared codes, changed the front led out, and new battery today. The battery had be doing the slow cranking, so I think the battery was the main culprit so far so good
11-24-14, 01:41 PM
#14
Update,
No ABS or Brake lights anymore, but after awhile I got the check VSC warning again. My alignment is a little off, I didn't realize it until I put my new wheels on.
I haven't had a chance to get her back to alignment shop though
No ABS or Brake lights anymore, but after awhile I got the check VSC warning again. My alignment is a little off, I didn't realize it until I put my new wheels on.
I haven't had a chance to get her back to alignment shop though
11-24-14, 01:59 PM
#15
Driver School Candidate
Join Date: Nov 2014
Location: California
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a bad ABS Module, or wheel sensor. I'm new to Lexus, but with Bosch ABS modules in BMW's when the module fails or starts failing it throws ABS, DSC (VSC), Brake light. The ABS and Brake light will be intermittent but the DSC (VSC) will be constant.