Look Here 2011+ LED headlights Stand Alone Fog DYI - Club Lexus Forums


Look Here 2011+ LED headlights Stand Alone Fog DYI

Reply
 
 
 
Thread Tools Search this Thread
Old 01-24-14, 12:49 PM   #1
ULTSISF
Lead Lap
Thread Starter
iTrader: (2)
 
Join Date: May 2013
Location: MD
Posts: 452
Arrow Look Here 2011+ LED headlights Stand Alone Fog DYI

First of all lets give credit where is deserved to PhilDeltbee for taking the time to figure this out for us.I dont know why he never made a thread on how to do this but anyway ill be the middle men on this one.
I know there has been plenty of questions as to how to do this and so for, well here it is. Disclaimer im not responsible for any damages IF any occurs, this method works perfect without any issues if follow the instructions

Pull Module out


Tap green wire with red stripe and solid white wire


Slide the module back in place might be a little tight but it goes in, make sure the 2 wires you just tapped are exposed you will have to run them thru the firewall..Tip make sure your cables are long


here you see the wires going thru the grommet at the upper driver side corner.. Tip wrap the wires with a metal hanger or your item of choice to slide them thru


Once the wires go thru the grommet i decided i wanted to keep a stock look so i opted to get an actual Toyota Fog light switch found on the tacomas/tundras/camrys etc...fits like a glove


Fog Lamp Sw Assy 84160-04020 thats the actual switch i have...I didnt do this step but for those willing to go this route buy the harness too will make your life easier when connecting the cables. For those on a budget you can just buy a regular switch to turn the fogs on/off you choice.

Should look like this when you are done

Last edited by ULTSISF; 01-24-14 at 12:56 PM.
ULTSISF is offline   Reply With Quote
Old 01-24-14, 01:00 PM   #2
ULTSISF
Lead Lap
Thread Starter
iTrader: (2)
 
Join Date: May 2013
Location: MD
Posts: 452
Default

Forgot to add, with this mod your fogs will turn on even if the car is off...when driving at night just use the regular switch for the fogs that's what I do, no problems.
ULTSISF is offline   Reply With Quote
Old 01-24-14, 01:13 PM   #3
digger08
Lexus Test Driver
iTrader: (1)
 
Join Date: Jan 2004
Location: Canada
Posts: 1,002
Default

Awesome!


...does the factory OE fog switch illuminate with dash lighting?


Digger08
digger08 is offline   Reply With Quote
Old 01-24-14, 01:15 PM   #4
ULTSISF
Lead Lap
Thread Starter
iTrader: (2)
 
Join Date: May 2013
Location: MD
Posts: 452
Default

Quote:
Originally Posted by digger08 View Post
Awesome!


...does the factory OE fog switch illuminate with dash lighting?


Digger08
I eliminated that bc since the power is direct it would always stay lid. Maybe by getting the factory oem
Harness it can illuminate with the dash lights just a thought.

Last edited by ULTSISF; 01-24-14 at 01:19 PM.
ULTSISF is offline   Reply With Quote
Old 01-24-14, 01:16 PM   #5
digger08
Lexus Test Driver
iTrader: (1)
 
Join Date: Jan 2004
Location: Canada
Posts: 1,002
Default

Quote:
Originally Posted by ULTSISF View Post
I eliminated that bc since there power is direct it would always stay lid.
Makes sense...thanks for the write up


Digger08
digger08 is offline   Reply With Quote
Old 01-25-14, 12:10 AM   #6
Defratos
Lexus Test Driver
 
Defratos's Avatar
 
Join Date: Oct 2011
Location: On a sand dune
Posts: 1,064
Default

so this DIY is so that you can drive with your fogs on when you don't have your main beam lights on correct?
Defratos is offline   Reply With Quote
Old 01-25-14, 06:52 AM   #7
ULTSISF
Lead Lap
Thread Starter
iTrader: (2)
 
Join Date: May 2013
Location: MD
Posts: 452
Default

Quote:
Originally Posted by Defratos View Post
so this DIY is so that you can drive with your fogs on when you don't have your main beam lights on correct?
Exactly
ULTSISF is offline   Reply With Quote
Old 01-25-14, 11:44 AM   #8
Meraki Autoworks
Lexus Enthusiast/Vendor
iTrader: (5)
 
Meraki Autoworks's Avatar
 
Join Date: Oct 2011
Location: California
Posts: 4,722
Default

awesome thread, id do it but I dont wanna splice into my wires.. no experience hahah
__________________


"Meraki Autoworks is an international one stop shop to turn your vision into a reality."

Text us for a quote! 213 394 2886
Email: Info@Meraki-Autoworks.com
Shop Builds: '10 ISF, '15 IS250 F-Sport, '16 RC200T
Meraki Autoworks is online now   Reply With Quote
Old 01-25-14, 12:11 PM   #9
bnizzle87
Lexus Fanatic
 
bnizzle87's Avatar
 
Join Date: Jul 2009
Location: CA
Posts: 5,319
Default

It's a great look. I have zero experience with splicing wires, but at least the thread will help give guidance to shop guys who want to do this mod. I can't wait to see how it looks at night with the '14 fogs. Thanks ULTSISF!
bnizzle87 is offline   Reply With Quote
Old 01-25-14, 08:35 PM   #10
Frank1298
Driver
 
Join Date: May 2013
Location: Houston, TX
Posts: 171
Default

Awesome I love the look of this I will have to order the switch and get this mod done. So can you just leave the switch on auto to get the fog lights and head light to work at night or do you have to switch them on manually?
Frank1298 is offline   Reply With Quote
Old 01-25-14, 09:16 PM   #11
Joe Z
Lexus Fanatic
iTrader: (8)
 
Joe Z's Avatar
 
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 12,081
Lightbulb

Awesome thread.. I know several 2 IS guys have done this similar mod...

So which is the important wire..???

Sounds like one is the Fog Wire and the other is a HOT power..


If I'm thinking this through correctly, it can be done by only pulling one wire to the interior switch and we can pick up power from the interior fuse block or even tap cig lighter (never used for me)

This should also eliminate them working with the car OFF..

Joe Z
Joe Z is offline   Reply With Quote
Old 01-26-14, 10:04 AM   #12
ULTSISF
Lead Lap
Thread Starter
iTrader: (2)
 
Join Date: May 2013
Location: MD
Posts: 452
Default

Quote:
Originally Posted by Frank1298 View Post
Awesome I love the look of this I will have to order the switch and get this mod done. So can you just leave the switch on auto to get the fog lights and head light to work at night or do you have to switch them on manually?
Using the method I described it will have to be done manually always.
ULTSISF is offline   Reply With Quote
Old 01-26-14, 10:06 AM   #13
ULTSISF
Lead Lap
Thread Starter
iTrader: (2)
 
Join Date: May 2013
Location: MD
Posts: 452
Default

Quote:
Originally Posted by Joe Z View Post
Awesome thread.. I know several 2 IS guys have done this similar mod...

So which is the important wire..???

Sounds like one is the Fog Wire and the other is a HOT power..


If I'm thinking this through correctly, it can be done by only pulling one wire to the interior switch and we can pick up power from the interior fuse block or even tap cig lighter (never used for me)

This should also eliminate them working with the car OFF..

Joe Z
Joe Z good point....I believe it can be done using the ground or hot power cable within the inside of the car. I do think it will require a few more steps n some skinny hands lol
ULTSISF is offline   Reply With Quote
Old 01-26-14, 11:46 AM   #14
lobuxracer
Tech Info Resource
iTrader: (2)
 
lobuxracer's Avatar
 
Join Date: Jul 2006
Location: Georgia
Posts: 15,321
Default

You'd want to connect to IG2. It's switched power for accessories. Then you wouldn't need to remember to turn anything off.
lobuxracer is offline   Reply With Quote
Old 01-26-14, 01:49 PM   #15
JT2MA71
Lexus Test Driver
iTrader: (7)
 
JT2MA71's Avatar
 
Join Date: Dec 2006
Location: WA
Posts: 835
Default

I have been wanting to do this too! Thanks for the write up
I do want to do it the way I did the supra though, still turns off with the timer but not dependent on the low beam. I'd like to make it dependent on the park lights this time instead of the low beams, and using the factory switch, without adding a second switch. Does anyone have a wiring schematic for the headlights, park, and fog? Is there still a fog light relay or is it all controlled by that module?
JT2MA71 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
CA FS: polished GTE valve covers, one has chip CHEAP also 2jzge ecu phamxOC SC400 / 300 Classifieds 3 10-03-14 02:19 AM
MA IS300 JDM ALTEZZA headlight retrofit project g37 projectors 3" clear lens 300 Shipped truviethug 1Gen IS300 Classifieds (98-05) 7 05-12-14 07:42 AM
ULTSISF Build ULTSISF Build Threads 33 04-25-14 10:36 AM
PA FS: Full staggered set - 225/35/19 & 255/30/19 Bridgestone Potenza 05Mdriver Wheels and Tires Classifieds 0 04-18-14 03:35 PM
KS 99 GS400 Highly custom riceviper Lexus Vehicles Classifieds 4 02-23-14 11:27 AM


Tags
2010, 2011, 350, car, es, factory, fog, fogs, headlight, hot, isf, lexus, light, switches, wire

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 05:02 PM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved