lexus tuned super charger and greddy exhaust?
#31
does this mean that gretty finaly made a supercharger for the isf? im sorry if its a stupid question but I have been waiting for a while fo this now and I want one..been out of the loop lately due to a whole year of body building.
#33
Instructor
iTrader: (56)
Manufactured in Japan, Greddy had a few kits for the 4.3 3UZ-FE V8. From the research I've done the setup I just purchased was the only Greddy kit made to fit the 2URGSE....the manifold was made for the 3uzfe but custom machine work was performed to make it fit the 2urgse head, fuel rails, water lines, etc. Additionally, it has a custom injector housing, vacuum ports and a few wire clip mounts. Lol
Greddy (or what's left of Trust) were decently excited that this setup was going to an "enthusiasts" 2URGSE. It's set to arrive Friday, I'll post up pics.
anyone is always welcome in my garage...I'm a good 3hrs away though. I plan have things wrapped up in a few months and be at a mid Spring Columbus meet
Greddy (or what's left of Trust) were decently excited that this setup was going to an "enthusiasts" 2URGSE. It's set to arrive Friday, I'll post up pics.
anyone is always welcome in my garage...I'm a good 3hrs away though. I plan have things wrapped up in a few months and be at a mid Spring Columbus meet
Last edited by mikellucci; 12-18-13 at 05:47 AM.
#34
Lead Lap
iTrader: (4)
If tuning can be done for the Toyota trucks,tundra,taco with software why can't the same company tune our cars? Are the ecu's that extremely different?
The 7th injector reminds me of what stillen supercharger kits used to do on Nissan VQ motors. I had a Nissan truck and G37 prior to my third Lexus purchase. They would often use the extra injector to dump any extra fuel at wot as they didn't expect anyone to run meth or some other types of intake cooling. Funny to see it transferred fr gready. But from what I've read the older edelbrock super charger kits also used something like that as well on the mustang applications.
When you get the blower please post more photos of it.
The 7th injector reminds me of what stillen supercharger kits used to do on Nissan VQ motors. I had a Nissan truck and G37 prior to my third Lexus purchase. They would often use the extra injector to dump any extra fuel at wot as they didn't expect anyone to run meth or some other types of intake cooling. Funny to see it transferred fr gready. But from what I've read the older edelbrock super charger kits also used something like that as well on the mustang applications.
When you get the blower please post more photos of it.
#35
Instructor
iTrader: (56)
If tuning can be done for the Toyota trucks,tundra,taco with software why can't the same company tune our cars? Are the ecu's that extremely different?
The 7th injector reminds me of what stillen supercharger kits used to do on Nissan VQ motors. I had a Nissan truck and G37 prior to my third Lexus purchase. They would often use the extra injector to dump any extra fuel at wot as they didn't expect anyone to run meth or some other types of intake cooling. Funny to see it transferred fr gready. But from what I've read the older edelbrock super charger kits also used something like that as well on the mustang applications.
When you get the blower please post more photos of it.
The 7th injector reminds me of what stillen supercharger kits used to do on Nissan VQ motors. I had a Nissan truck and G37 prior to my third Lexus purchase. They would often use the extra injector to dump any extra fuel at wot as they didn't expect anyone to run meth or some other types of intake cooling. Funny to see it transferred fr gready. But from what I've read the older edelbrock super charger kits also used something like that as well on the mustang applications.
When you get the blower please post more photos of it.
From what I gather the SEMA ISF wasn't controlling the extra injector aside from letting it **** wildly over a specified RPM. Lol I'm sure it ran like garbage..
#42
Instructor
iTrader: (56)
From what I gather the manifold started out as Greddy's 4.3 3UZ-FE V8 manifold. It looks like it has custom feet to fit the 2urgse heads...along with a port job and custom injector bungs/holes to again fit the 2urgse injectors and rails.
The rest of the hardware is just the blower and inlet from Greddy. Nothing I've seen makes this impossible to duplicate by a capable machine shop. More info. to come though
The rest of the hardware is just the blower and inlet from Greddy. Nothing I've seen makes this impossible to duplicate by a capable machine shop. More info. to come though
#43
From what I gather the manifold started out as Greddy's 4.3 3UZ-FE V8 manifold. It looks like it has custom feet to fit the 2urgse heads...along with a port job and custom injector bungs/holes to again fit the 2urgse injectors and rails.
The rest of the hardware is just the blower and inlet from Greddy. Nothing I've seen makes this impossible to duplicate by a capable machine shop. More info. to come though
The rest of the hardware is just the blower and inlet from Greddy. Nothing I've seen makes this impossible to duplicate by a capable machine shop. More info. to come though
#44
Tech Info Resource
iTrader: (2)
Definitely looks like a prototype. You could digitally print a much better manifold.
Thread
Thread Starter
Forum
Replies
Last Post
New Product Greddy Exhaust!! Be the First!
Meraki Autoworks
CL Vendor Products for RC
3
12-10-16 10:31 AM