When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I installed a 3K HID kit on mine, output was horrible due to the housing not being designed for HID bulbs. I switched to the yellow bulbs CUTigters linked to and they are much better.
410whp with just joe z intake/exhaust and silky headers? Dyno jet?
I got my bulbs and overlay a couple days ago and I am having a hard time installing the 3m adhesive that I purchased off of ebay without showing any bubbles or imperfections. Can anyone give me any techniques
I struggled with mine too..i used a blowdryer to soften up the overlay. Although it didnt come out perfect, 75% of the bubbles did go away after a few weeks.
Anybody with the Putco Jet Yellows plus yellow laminex notice their overlay darken near the center? It almost looks like these bulbs run hotter and toasted the vinyl a bit.
The bulbs are rated at the same wattage as the stock bulbs. The problem is that the film actually makes the housings hotter by retaining heat within the fog lights.
I actually had the film on for quite a long time with the stock bulbs and never had the effect. Same wattage - makes sense that there shouldn't be any difference in temperature. I was just curious if anyone else had this happen, or if its possible I could have installed them improperly (though I can't imagine how).