2013 headlights = Loss of autoleveling?
#1
Lead Lap
Thread Starter
2013 headlights = Loss of autoleveling?
Good Morning Men, I did my research, wired for the leds to function as I desired, but Im at a loss. I know I was going to lose the AFS functionality. But, we also lose auto-leveling function? Based upon research I did I did not read about needing to re-pin for the auto-leveling motor. Is there something I have missed. Help is greatly appreciated as my night visibility is horrible now an not satisfied
#2
Pole Position
iTrader: (8)
Join Date: May 2011
Location: Florida
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
As far as night visibility goes did you adjust the screws on them to aim them higher yet? They are probably pointed too far down.
I have the 11 lights and the auto leveling feature worked but that annoying light came on the dash so I unplugged it lol.
I have the 11 lights and the auto leveling feature worked but that annoying light came on the dash so I unplugged it lol.
#3
Lead Lap
Thread Starter
I tried t manually adjust it, but its so small of adjustment its not enough....o you have a 2008 ISF? maybe that is my problem why I may need to re-pin. I need my auto--levelng!
Trending Topics
#9
Lead Lap
Thread Starter
For more info the headlights are out of a 2012, and I have a 2008. Many report a rewire that sewell Lexus completes before shipping...Surprised many others have not had this problem..Or do you not have auto leveling either?
#11
Lead Lap
Thread Starter
Ok, that helps me verify that it is a pin out issue..if anyone has any pictures of the pin out you receive from sewell....and or when I get home I will also compare my old headlights to my new ones.
#14
Driver
iTrader: (1)
Join Date: Jun 2012
Location: Lancaster Ca
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I am expecting my LED lights from Sewell any day now, and want to makes sure that I am understanding this correctly. Do I have to repin the lights or are they pinned correctly to work with the 08 harness and I can just install them?
Thanks
Thanks
#15
Lead Lap
Thread Starter
Thank you Digger for the pin out picture, I just manually adjusted for now. when I get a chance I will compare. If I remember correctly the pin out for the auto leveling sensor is correct then but there looks to be a few more wires which most likely is for led. But t help those in future I will document for those whom do not buy a re-pinned headlight. Thanks again men,