///WALD Trunk Spoiler Installed **hybrid emblem**
#1
///WALD Trunk Spoiler Installed **hybrid emblem**
Hey guys,
After a few months of waiting, I've finally got around to installing a Wald trunk spoiler.
Removal of the OEM lip was a HUGE pain. 2 outside (forgot the size, 8mm possibly) nuts to unscrew, and 5 plastic pins holding in the interior of the spoiler.
Used a kitchen bread knife (yes, very carefully, lol) to cut off the doublesided tape, which was practically a part of the trunk itself, and barely popped the plastic protrusions out.
When the oem spoiler was off, alcohol prepped the trunk, and melted off the plastic rivet holders with a certain lighter and heat gun.
I sanded down the inside of the painted Wald lip (painted at an Infiniti dealer) and applied 3M adhesive promoter which essentially melted into the FRP material of the spoiler.
I then applied sections of the 3M VHB tape onto the spoiler.
fitment was 95% accurate, as the sides didn't exactly line up (genuine Wald).
2 man job, I was able to easily align the spoiler on the sides.
I have one bad quality night pic right now, so I will post more pics later regarding the removal/install/spoiler itself.
I will also post materials used for this install (strongest 3M tape)
Lastly, also installed a roof spoiler alongside with the Wald
and yes, that's a Hybrid emblem (i think im the first hybrid ISF on the forum). I love the blue trim in it, matches the USB flawlessly
Spoiler will still be buffed and needs to settle in fully, the cold doesn't help!
After a few months of waiting, I've finally got around to installing a Wald trunk spoiler.
Removal of the OEM lip was a HUGE pain. 2 outside (forgot the size, 8mm possibly) nuts to unscrew, and 5 plastic pins holding in the interior of the spoiler.
Used a kitchen bread knife (yes, very carefully, lol) to cut off the doublesided tape, which was practically a part of the trunk itself, and barely popped the plastic protrusions out.
When the oem spoiler was off, alcohol prepped the trunk, and melted off the plastic rivet holders with a certain lighter and heat gun.
I sanded down the inside of the painted Wald lip (painted at an Infiniti dealer) and applied 3M adhesive promoter which essentially melted into the FRP material of the spoiler.
I then applied sections of the 3M VHB tape onto the spoiler.
fitment was 95% accurate, as the sides didn't exactly line up (genuine Wald).
2 man job, I was able to easily align the spoiler on the sides.
I have one bad quality night pic right now, so I will post more pics later regarding the removal/install/spoiler itself.
I will also post materials used for this install (strongest 3M tape)
Lastly, also installed a roof spoiler alongside with the Wald
and yes, that's a Hybrid emblem (i think im the first hybrid ISF on the forum). I love the blue trim in it, matches the USB flawlessly
Spoiler will still be buffed and needs to settle in fully, the cold doesn't help!
#5
Your #1 Lexus Vendor
iTrader: (8)
looks sweeeeeet
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Trending Topics
#10
Lexus Test Driver
iTrader: (4)
looks good
i feel ur paint with that oem tape, took me forever to clean mine up lol
did you get the fiberglass one or the carbon version?
i got the carbon one and had my painter get creative
http://www.flickr.com/photos/streetxdreamer/7778160744/http://www.flickr.com/photos/streetxdreamer/7778160744/ by http://www.flickr.com/people/streetxdreamer/, on Flickr
Pretty sure they all have that gap, mine has it too
http://www.flickr.com/photos/streetxdreamer/7818810094/http://www.flickr.com/photos/streetxdreamer/7818810094/ by http://www.flickr.com/people/streetxdreamer/, on Flickr
i feel ur paint with that oem tape, took me forever to clean mine up lol
did you get the fiberglass one or the carbon version?
i got the carbon one and had my painter get creative
http://www.flickr.com/photos/streetxdreamer/7778160744/http://www.flickr.com/photos/streetxdreamer/7778160744/ by http://www.flickr.com/people/streetxdreamer/, on Flickr
Pretty sure they all have that gap, mine has it too
http://www.flickr.com/photos/streetxdreamer/7818810094/http://www.flickr.com/photos/streetxdreamer/7818810094/ by http://www.flickr.com/people/streetxdreamer/, on Flickr
Last edited by streetx; 10-25-12 at 07:34 PM.
#14
Wald Carbon by streetxdreamer, on Flickr
Pretty sure they all have that gap, mine has it too
ISF_17 by streetxdreamer, on Flickr
good call on the exhaust too