Official IS-F Drag Time/Dyno Time/Performance Thread
#32
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
This is EXACTLY how I have been Dyno'ing since 2002 on the DynoJet..
Also, good idea for members to post Fuel Octane, Dyno brand used & miles on the IS-F..
and
Base or Modified...
List of modifications is always a must, Including different Wheels, etc etc..
6th Gear is the Correct & Preferred gear for the Dyno Testing the IS-F .
Nice Work so far Gang!!!
Joe Z
Also, good idea for members to post Fuel Octane, Dyno brand used & miles on the IS-F..
and
Base or Modified...
List of modifications is always a must, Including different Wheels, etc etc..
6th Gear is the Correct & Preferred gear for the Dyno Testing the IS-F .
Nice Work so far Gang!!!
Joe Z
Last edited by Joe Z; 02-24-09 at 12:49 PM.
#35
11 Second Club
iTrader: (2)
Juanca, don't you think it's odd that you are the only one to have a baseline graph that doesn't show power gained from 5200-6000rpms? Your MHP graph looks normal. I remember you stated that you had to drive hard to get there and didn't have a chance to cool down or anything for your baseline run. I'm just asking because having a bum baseline would increase the gains shown by the MHP tune.
#36
Lexus Champion
iTrader: (5)
caymandive,
Odd? You're making it sound like I intentionally did something fishy during my stock dyno pull so MHP's tune would look better. I posted this numbers and graphs the same day I went to the dyno, about 2 weeks before having the MPH tune. Why didn't anybody complain? Also, AFAIK my peak WHP on the stock dyno was at ~6300RPM, it was 349.34WHP SAE corrected with CF set at 5. It's higher than the average IS-F so far, not the highest though. I've been transparent and honest throughout the whole tuning process, and just in case there are doubts here are my 3 stock dyno pulls together, the last 2 of the session are even lower:
Odd? You're making it sound like I intentionally did something fishy during my stock dyno pull so MHP's tune would look better. I posted this numbers and graphs the same day I went to the dyno, about 2 weeks before having the MPH tune. Why didn't anybody complain? Also, AFAIK my peak WHP on the stock dyno was at ~6300RPM, it was 349.34WHP SAE corrected with CF set at 5. It's higher than the average IS-F so far, not the highest though. I've been transparent and honest throughout the whole tuning process, and just in case there are doubts here are my 3 stock dyno pulls together, the last 2 of the session are even lower:
#37
11 Second Club
iTrader: (2)
caymandive,
Odd? You're making it sound like I intentionally did something fishy during my stock dyno pull so MHP's tune would look better. I posted this numbers and graphs the same day I went to the dyno, about 2 weeks before having the MPH tune. Why didn't anybody complain? Also, AFAIK my peak WHP on the stock dyno was at ~6300RPM, it was 349.34WHP SAE corrected with CF set at 5. It's higher than the average IS-F so far, not the highest though. I've been transparent and honest throughout the whole tuning process, and just in case there are doubts here are my 3 stock dyno pulls together, the last 2 of the session are even lower:
Odd? You're making it sound like I intentionally did something fishy during my stock dyno pull so MHP's tune would look better. I posted this numbers and graphs the same day I went to the dyno, about 2 weeks before having the MPH tune. Why didn't anybody complain? Also, AFAIK my peak WHP on the stock dyno was at ~6300RPM, it was 349.34WHP SAE corrected with CF set at 5. It's higher than the average IS-F so far, not the highest though. I've been transparent and honest throughout the whole tuning process, and just in case there are doubts here are my 3 stock dyno pulls together, the last 2 of the session are even lower:
Anyway I don't want to go too far off topic, so shoot me a PM or something and we can discuss.
#38
I posted this in another thread, stock vs. joe z intake/exhaust...93 Valero octane gas...18k miles on the clock...6th gear pull...and I was wearing a matching (matching to the car) silver shirt during the dyno session
#41
Lexus Champion
iTrader: (5)
Tomorrow night I'll be going to the same track that I went before the MHP tune (Palm Beach International Raceway - www.racepbir.com), but this time I'll have a helmet!
Before the tune I ran 12.80@111mph (only attempt at the 1/4 mile, don't ask me why), so I want to see the numbers now that I've been using MHP's tune for the past 3 months. I'll keep the important variables the same as in the before-tune run, 1/2 gas, all electronics off, VSC off, SPORT, manual, and full weight. I'll post the new times probably on Monday, I'll be quite busy on Saturday and Sunday attending the Sony Ericsson Open in Miami...
Before the tune I ran 12.80@111mph (only attempt at the 1/4 mile, don't ask me why), so I want to see the numbers now that I've been using MHP's tune for the past 3 months. I'll keep the important variables the same as in the before-tune run, 1/2 gas, all electronics off, VSC off, SPORT, manual, and full weight. I'll post the new times probably on Monday, I'll be quite busy on Saturday and Sunday attending the Sony Ericsson Open in Miami...