fknISC808's Comeback Build
#1
fknISC808's Comeback Build
Some of you may know me, alot of you probably dont. I use to frequent the forums everyday but life happened and I strayed away for a while. I am currently in the process of completing my build and am getting back into the scene, figured why not post it up. Ill start off from the beginning and work my way to the present.
Back in 2009 I bought Candy... 1st one off the lot here in Hawaii 2010 Lexus IS250C Tungsten Pearl Black Leather with Luxury and Navigation Package
Within 6 months of buying the car I linked up with Samson of Revision Audio here in Hawaii and was able to install the AirRunner Basic Suspension used on the sedans. Samson had to R&D the kit because the rear struts were too long and would not allow the rear to slam all the way down. I also bought the Genesis Track Package wheels from my co-worker.
Did a photo shoot to help a friend launch his business
February 2010 my new rear struts come in from Air Runner and now shes sitting pretty
A shot at Club Lexus Hawaii's Saturday Night Starbucks meetup
A few months go by and Samson was asked by Air Runner to shoot the car for their Catalog. I didnt have wheels so he used 19" Weds Mavericks 005s to shoot the car, which I purchased later that day. haha
A few years go by and I attend some events with nothing done to the car. I bought a few new things here and there but they sat in the garage waiting....
Back in 2009 I bought Candy... 1st one off the lot here in Hawaii 2010 Lexus IS250C Tungsten Pearl Black Leather with Luxury and Navigation Package
Within 6 months of buying the car I linked up with Samson of Revision Audio here in Hawaii and was able to install the AirRunner Basic Suspension used on the sedans. Samson had to R&D the kit because the rear struts were too long and would not allow the rear to slam all the way down. I also bought the Genesis Track Package wheels from my co-worker.
Did a photo shoot to help a friend launch his business
February 2010 my new rear struts come in from Air Runner and now shes sitting pretty
A shot at Club Lexus Hawaii's Saturday Night Starbucks meetup
A few months go by and Samson was asked by Air Runner to shoot the car for their Catalog. I didnt have wheels so he used 19" Weds Mavericks 005s to shoot the car, which I purchased later that day. haha
A few years go by and I attend some events with nothing done to the car. I bought a few new things here and there but they sat in the garage waiting....
Last edited by fknISC808; 05-01-13 at 12:22 PM.
#2
2012 planning begins to start completing my build for 2013. Taxes comes and goes and here is what I have been currently working on.
Took the Weds off and sold them
Here is what the wheels went on
I upgraded my single compressor setup for dual Viair 444c compressors and ripped out my trunk liners to start the rebuild process.
I had my eyes on a set of Work Meister S1R's for a long time! I didnt get it in the finish that I wanted but these are pretty pimp. Here is the test fit of the fronts 19x9.5
Here are the rears 19x10.5
Had them wrapped in some inexpensive tires because shes not daily driven anymore
In the mean time, I purchased an Accuair E-Level kit from SD.IS, Megan Toe arms, Tracktion Arms, Upper camber Arms, and Lower Control Arms for the rear. Miscellaneous air bag parts, MyRide rear diffuser, Vertex front lip for the sedans, and Cross drilled/Slotted rotors.
I began to rip out the existing manual paddle switches and replaced it with my Dakota Digital Gauge
Mock up of the MyRide rear diffuser that will be molded
I hacked up the vertex front lip for the sedans and fitted it to my bumper. My boy at Affiliiated Autoworks will be molding it once the car goes in for paint.
Moved my attention to my suspension. Installed the rear links over the last weekend and then moved on to my trunk. My stock links removed
Installed
Here are some comparison pictures of the stock versus Megan links
I had an issue with my lower control arms and my strut endlink. I had to shave it down about 2-3mm for it to fit.
While doing my links I also threw on my rotors, I plan on painting my calipers for now. BBK is not really in my future, but who knows
I had a totally different plan with my trunk but due to limited space and and seeing ISCJonny's trunk setup, I decided to go a similar route. Its a mess, but here is my first mock up of whats coming.
Figured I needed some insulation to lessen the noise that Ive hear from my compressors. Purchased fatmat dynomat from Amazon. Pretty cheap and not bad stuff.
Wrapped my base board in carpet material
A good friend of mine who owns a graphics business added Hydro Dipping to his arsenal so we dipped my tank in Benjamins to show off his work.
Took the Weds off and sold them
Here is what the wheels went on
I upgraded my single compressor setup for dual Viair 444c compressors and ripped out my trunk liners to start the rebuild process.
I had my eyes on a set of Work Meister S1R's for a long time! I didnt get it in the finish that I wanted but these are pretty pimp. Here is the test fit of the fronts 19x9.5
Here are the rears 19x10.5
Had them wrapped in some inexpensive tires because shes not daily driven anymore
In the mean time, I purchased an Accuair E-Level kit from SD.IS, Megan Toe arms, Tracktion Arms, Upper camber Arms, and Lower Control Arms for the rear. Miscellaneous air bag parts, MyRide rear diffuser, Vertex front lip for the sedans, and Cross drilled/Slotted rotors.
I began to rip out the existing manual paddle switches and replaced it with my Dakota Digital Gauge
Mock up of the MyRide rear diffuser that will be molded
I hacked up the vertex front lip for the sedans and fitted it to my bumper. My boy at Affiliiated Autoworks will be molding it once the car goes in for paint.
Moved my attention to my suspension. Installed the rear links over the last weekend and then moved on to my trunk. My stock links removed
Installed
Here are some comparison pictures of the stock versus Megan links
I had an issue with my lower control arms and my strut endlink. I had to shave it down about 2-3mm for it to fit.
While doing my links I also threw on my rotors, I plan on painting my calipers for now. BBK is not really in my future, but who knows
I had a totally different plan with my trunk but due to limited space and and seeing ISCJonny's trunk setup, I decided to go a similar route. Its a mess, but here is my first mock up of whats coming.
Figured I needed some insulation to lessen the noise that Ive hear from my compressors. Purchased fatmat dynomat from Amazon. Pretty cheap and not bad stuff.
Wrapped my base board in carpet material
A good friend of mine who owns a graphics business added Hydro Dipping to his arsenal so we dipped my tank in Benjamins to show off his work.
Last edited by fknISC808; 05-01-13 at 01:56 PM.
Trending Topics
#8
I'm excited you're back on it! I'll definitely be watching your progress. When mine and yours is both done I should ship mine to Hawaii for a show. Even though I'm sure that would be crazy expensive!
#11
Thanks fellas there is still alot of work to be done.
Me too! although its tough having to find time with a newborn. you can ship your car here from cali for 1k lol that would be one expensive entry fee.
thanks bro, hopefully you'll see it in person. trying to finish it by slammed society crossing fingers
Yes, it sits lower than the safety puller outer thingy. haha forgot what its called. lack of sleep
Yes, it sits lower than the safety puller outer thingy. haha forgot what its called. lack of sleep