dangla1603

hi everyone, im about to have a set of vossens wheels from my friend but they are 5x120, he said i need to have spacers thing to be able to fit them. They are 20x9 ET35 20x10 ET45, does anyone know what spacer should i get? Thanks

LexSense

iTrader: (2)

Hmm I've heard about conversion spacers before, but if I remember correctly the safe minimum for those are like 20mm.
This would make your wheel offsets too aggressive and not fit the car.

corradoMR2

^^^ I would agree with that. Those wheel specs as they are are near the limit in terms of rubbing, especially if you plan to drop the car.

See the aftermarket wheels thread to see if you can find similar wheels to yours and what other owners may have done on a drop and/or spacers. https://www.clublexus.com/forums/is-...exclusive.html

Phamkq

With a 20mm spacer on the 35 offset fronts, you will definitely rub. Rolling and pulling the fender MIGHT be able to pull off the specs if you're not going to lower.

davedudu

If you can't use the wheels, I have an LS460 and might be interested in the wheels. TIA Dave

dangla1603

Thank you all for the advice,I luckily trade the set with other guy. And the wheels are perfect fit on my car