jackdahou

2014 is 250 AWD
I am currently running 19x10 35 offset, with 255 35 square setup. I am rubbing front and rear like crazy over the smallest road imperfections. My wheels are too wide, and i do not want to go through the trouble of getting new wheels and tires.

I think I'd have to resort to a camber. Do you guys have any suggestions? Funds are tight atm and i would like to spend around 500-600 on this.

What kits are available for the front and rear?
Will minor camber eat away at my tires?
How much do shops normally charge to install and allign?

All suggestions will be greatly appreciated!

Keithwuuuu

iTrader: (1)

I bought a brand new set of spc rear control arms from a member here for $190. I currently am dropped two inches on coilovers with stock wheels. Have no issues at all with rubbing. There's a one finger gap for my rear wheels. I had the camber adjusted as close to stock as possible. I'm definitely gonna roll my fenders when my new wheels come in cuz Imma be running a similar setup to urs. Hope this helps!

Boomin

Your fronts don't need any help? being so low I'm thinking your having camber issues or minimal.

Keithwuuuu

iTrader: (1)

No, they are pretty close to stock. I'll look for the paper from the alignment shop and show u my numbers

Meraki Autoworks

iTrader: (8)

We sell SPC and Megan Racing products. Perfect to resolve your issue.

-Josh

Keithwuuuu

iTrader: (1)

Josh is the man for all ur parts needs!

Meraki Autoworks

iTrader: (8)

Thank you sir!

-Josh

jkhang714

Post pix of how ur car currently looks with the wheel set up u have. Maybe u just need less wide of tires. Perhaps 235/35's

jackdahou

Front
Front
Rear
Rear
I've ran 335 35 before these tires, and i was rubbing on the rims itself!

Ignore the major curb rashes! Incredibly embarrassing. They will be refinished asap!

iJDMTOY

iTrader: (5)

Go with SPC or Megan both are really good brands for these.

robert2423

That Tire is way to wide for the front.... try a 225/35.... thats what i run.