Front Lip Shopping
06-12-16, 05:41 PM
#32
Rookie
Thread Starter
Join Date: Jul 2012
Location: PA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
06-12-16, 07:21 PM
#34
Driver School Candidate
Join Date: Feb 2016
Location: TX
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ebay.com/usr/bestracingmo...53.m2749.l2754
Looks like this just not the real deal or carbon fiber.
http://www.aimgain.net/english/bodyk...50_fs/p15b.jpg
Last edited by Redshift; 06-12-16 at 07:26 PM.
06-13-16, 05:18 PM
#35
Rookie
Thread Starter
Join Date: Jul 2012
Location: PA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ebay.com/usr/bestracingmo...53.m2749.l2754
Looks like this just not the real deal or carbon fiber.
http://www.aimgain.net/english/bodyk...50_fs/p15b.jpg
Looks like this just not the real deal or carbon fiber.
http://www.aimgain.net/english/bodyk...50_fs/p15b.jpg
pretty easy to install man? screws or double sided tape?
thank you!
06-27-16, 01:57 PM
#38
Driver School Candidate
Join Date: Feb 2016
Location: TX
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
01-05-17, 12:23 PM
#39
Lexus Test Driver
01-05-17, 05:05 PM
#40
I have this lip as well - very nice for the price. I think I paid just just over $100 on eBay. It installs easily with 8 to 10 self drilling black screws - no need to drill holes. It screws into the bottom of the plastic front bumper.
One day I noticed it was hanging down near the front - I remember it bottoming out on a slopped driveway recently. When I looked underneath I could see one of the screws had pulled out. I also noticed that ALL of the nice black screws were rusting. I went down to Lowes and bought stainless steel pan-head screws in the next larger size and replaced them all in about 5 minutes. The SS screws are not black, but you can't see them anyway. The larger screws hold the lip on much tighter than the ones that came with it. If you get this lip I suggest you take the screws to the hardware store and get the next larger size in stainless steel.
Glen
----------------------------------
2015 IS350 F-Sport - Silver Lining
One day I noticed it was hanging down near the front - I remember it bottoming out on a slopped driveway recently. When I looked underneath I could see one of the screws had pulled out. I also noticed that ALL of the nice black screws were rusting. I went down to Lowes and bought stainless steel pan-head screws in the next larger size and replaced them all in about 5 minutes. The SS screws are not black, but you can't see them anyway. The larger screws hold the lip on much tighter than the ones that came with it. If you get this lip I suggest you take the screws to the hardware store and get the next larger size in stainless steel.
Glen
----------------------------------
2015 IS350 F-Sport - Silver Lining
04-29-20, 02:26 PM
#41
Sorry to bring this old thread, I'm thinking about purchasing that A-Style Lip as well, those that have it, you guys just used the existing screws from the car? Or new holes had to be drilled? Thank you
https://www.ebay.com/itm/A-Style-Fro...859e%7Ciid%3A1
https://www.ebay.com/itm/A-Style-Fro...859e%7Ciid%3A1
Thread
Thread Starter
Forum
Replies
Last Post