Burger Motosports IS200t Intake
#1
Driver School Candidate
Thread Starter
Burger Motosports IS200t Intake
Thinking about purchasing Burger Motorsports intake for my IS200t. For the people that have purchased one what are your thoughts?
http://burgertuning.com/Lexus_RC200t_IS200t_Intake.html
http://burgertuning.com/Lexus_RC200t_IS200t_Intake.html
#5
not necessarily with a turbo engine. There is a liquid to air intercooler on it. In my old DSM days, removing the air box and putting a cone filter was instant hp. It was a night and day difference even with it exposed in the engine bay. Air is still being forced in to where the filter is located when the car is moving.
Trending Topics
#12
I noticed the horn is near the filter box, which is good since the previous location was terrible. I'm used to changing horns on every service due to dust accumulating in the horn.
BTW I would recommend you to try the car without the intake filter cover/box, since it could reduce the car performance due to restriciting the air ( adding the box will remove any advantage related to increasing the flow). However the temperature can be addressed with the intercooler since many manufacturers design the cooling system to take more load than required.
BTW I would recommend you to try the car without the intake filter cover/box, since it could reduce the car performance due to restriciting the air ( adding the box will remove any advantage related to increasing the flow). However the temperature can be addressed with the intercooler since many manufacturers design the cooling system to take more load than required.
#15
This Burger intake will probably go the way of the Dodo bird now that the Injen intake has been released. If I was Burger Motorsports I would drastically reduce prices in order to clear out all inventory.