IS - 3rd Gen (2014-present) Discussion about the 2014+ model IS models

My full Audio install non-ML system

Thread Tools
 
Search this Thread
 
Old 03-11-16, 07:48 PM
  #16  
gregerst
Driver
Thread Starter
 
gregerst's Avatar
 
Join Date: Mar 2015
Location: Minnesota
Posts: 137
Likes: 0
Received 3 Likes on 3 Posts
Default

The non-ml system still has center speaker but I have it unplugged. The purpose of the center channel is mostly to provide a good center soundstage for both driver and passenger. 99% of the time I'm the only one in the car so I don't need to worry about that. Using time alignment in the DSP I have things tuned to provide the best soundstage for the driver's seat only.
Old 03-14-16, 11:06 PM
  #17  
devinkato
Driver School Candidate
 
devinkato's Avatar
 
Join Date: Mar 2016
Location: CA
Posts: 21
Likes: 0
Received 1 Like on 1 Post
Default

have a 2016 IS350 with non-ML stereo. Looking to do a 3-way active stage up front and dropping the rear fill, so I need to grab a full range stereo signal.

I'm understanding that I want to do this post-factory-amplifier - no problem.

Can anyone confirm:
1) Are the right and left front channel output of the stock amplifier full range?
2) Is the right and left front channel output of the stock amplifier flat?
3) Is there any volume-****-sensitive dynamic EQ'ing going on?

Thanks so much.
Old 07-01-16, 12:02 AM
  #18  
387
Intermediate
 
387's Avatar
 
Join Date: Apr 2016
Location: Toronto, ON
Posts: 280
Received 49 Likes on 38 Posts
Default

SICK BUILD!!!

What is everyone using for a processor in 2016/17?

I noticed JL Audio has some new integration product out., I'm looking at the Fix-86 and a compact 5 channel amp like a HD900/5 or an Alpine PDX-V9 to power a set of HA Clarius 6.5s up front and a TBD sub in the back.

Last edited by 387; 07-01-16 at 12:05 AM.
Old 07-01-16, 09:01 AM
  #19  
JustNoize
Driver
 
JustNoize's Avatar
 
Join Date: May 2014
Location: NY
Posts: 109
Likes: 0
Received 2 Likes on 2 Posts
Default

subscribed!
Old 07-01-16, 02:25 PM
  #20  
CriMe
Rookie
 
CriMe's Avatar
 
Join Date: Nov 2015
Location: NY
Posts: 93
Received 10 Likes on 9 Posts
Default

Originally Posted by 387
SICK BUILD!!!

What is everyone using for a processor in 2016/17?

I noticed JL Audio has some new integration product out., I'm looking at the Fix-86 and a compact 5 channel amp like a HD900/5 or an Alpine PDX-V9 to power a set of HA Clarius 6.5s up front and a TBD sub in the back.
I have the Audiocontrol DQ-61

Works really well for me. Coming from the JBL MS8 in my previous vehicle, I am very Happy with it. No bluetooth phone call lag for the person on the other end like the ms8, sound quality and imaging are exactly what I was looking for.
Old 07-02-16, 11:42 AM
  #21  
gregerst
Driver
Thread Starter
 
gregerst's Avatar
 
Join Date: Mar 2015
Location: Minnesota
Posts: 137
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by 387
SICK BUILD!!!

What is everyone using for a processor in 2016/17?

I noticed JL Audio has some new integration product out., I'm looking at the Fix-86 and a compact 5 channel amp like a HD900/5 or an Alpine PDX-V9 to power a set of HA Clarius 6.5s up front and a TBD sub in the back.
I ended up switching out the Mosconi processor for a Helix dsp pro. The processor is great and the user interface is so much better than mosconi's. I've also discovered that it's sufficient to only use the front right and left doors and sub as inputs from the factory amp. They're enough to provide the full range signal to aftermarket equipment.
Old 07-04-16, 02:03 PM
  #22  
specie
Driver
iTrader: (1)
 
specie's Avatar
 
Join Date: Jan 2006
Location: FL
Posts: 163
Received 1 Like on 1 Post
Default

Very nice setup with very good craftsmanship.
I think the Lexus ML system is waste of money and would be better spent on an aftermarket system.
On that note, how do you like the scanspeak setup? I'm thinking of getting a different car and planning another stereo setup.
Old 10-01-16, 07:50 PM
  #23  
387
Intermediate
 
387's Avatar
 
Join Date: Apr 2016
Location: Toronto, ON
Posts: 280
Received 49 Likes on 38 Posts
Default

Hey Greg, what is your take on the JL Audio FiX-86? For a much simpler system.... Or what else do your recommend? CriMe, the DQ-61 is second on my list.
Old 10-04-16, 12:15 PM
  #24  
E46CT
Lexus Test Driver
 
E46CT's Avatar
 
Join Date: Mar 2016
Location: zero maintenance
Posts: 8,605
Received 2,078 Likes on 1,569 Posts
Default

Very nice install. I wanted to keep my system as close as factory as possible so just added a subwoofer. see here: https://www.clublexus.com/forums/is-...-too-easy.html

I mounted my sub control underneath the dash on the left side.

Only thing I want to do next is dash speakers. Are the stock dash speakers 2 ways? mids and highs? I may leave them stock.. or replace them. Not sure yet. I don't want to throw money at them if it wont improve the sound. Trying to figure out what to do!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cmusic
IS - 2nd Gen (2006-2013)
138
03-22-24 03:53 AM
Keithwuuuu
3Gen IS250 / IS350 Classifieds (14-)
2
12-27-16 11:10 PM
redguy1972
ES - 5th Gen (2007-2012)
6
01-24-15 07:54 AM
RoyalOne
Build Threads
0
10-01-14 11:52 PM
ByoungWoo
Lexus Audio, Video, Security & Electronics
9
02-21-08 07:49 PM



Quick Reply: My full Audio install non-ML system



All times are GMT -7. The time now is 02:18 AM.