Aftermarket fogs for 3rd gen IS 250/350F Sport
#91
Racer
iTrader: (3)
Here's link to Nigel's fog light harness switch for anybody that cannot find it.
http://www.nigel-jdmparts.com/fog-li...ight%20harness
http://www.nigel-jdmparts.com/fog-li...ight%20harness
#95
Racer
iTrader: (1)
You guys are still off, Those are not the right size switch to fit blank panels on 3IS.
i've done my research on these switches
There are 3 different Lexus/Toyota sizes from over the years.
You can look at it like this specific to Lexus IS generations
1IS was LL size
2IS was L size
3IS was S size.
i've done my research on these switches
There are 3 different Lexus/Toyota sizes from over the years.
You can look at it like this specific to Lexus IS generations
1IS was LL size
2IS was L size
3IS was S size.
#97
Lexus Test Driver
From the pictures, it looks like the Nigel harness has the connectors to plug right into the OEM fog. All it would take is to "tap con" these fog's red and black wires into the corresponding wires on the harness or just cut off the connectors and solder them together.
#100
Arent they aimed so low that it wont blind others? ? Its mostly glare right?
I wonder if the housing can be taken apart. I would like the swap the led inside of it to a less bright one and different color.
I wonder if the housing can be taken apart. I would like the swap the led inside of it to a less bright one and different color.
#102
I hit a fairly small dip today and one of them came off! It was snug fit too. Funny thing is the side that was loose didn't fall off. I placed the fog back and made sure it was in. Debating if I should use aproxy or something for extra protection.