Question on tint drying/curing time
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2014
Location: North Carolina
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Question on tint drying/curing time
Looking to tint my car and I was looking between the Llumar CTX and Suntek CXP. I think I'm leaning towards the Llumar CTX.
Anyways, regardless of which one I choose I'm sure this would apply to both. Does anyone have experience, using either of these, as far as the dry/cure time it takes before I can roll down my windows, clean the car, etc.?
Thanks guys.
Anyways, regardless of which one I choose I'm sure this would apply to both. Does anyone have experience, using either of these, as far as the dry/cure time it takes before I can roll down my windows, clean the car, etc.?
Thanks guys.
#3
I had Llumar CTX installed on my 3IS and was advised not to lower windows for 48-72 hours. The thicker the tint film, the longer it needs to cure, but I've lowered my windows after 24 hours when the film was applied in cold weather (<40F) on my last car and it was fine.
#5
Driver School Candidate
Join Date: Dec 2014
Location: SC
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Just like stated above, its the quality of the install. On my Honda Civic i rolled down the window within the first 8 hours, have had it on the car for over 2 years and everything is still perfect.
Thread
Thread Starter
Forum
Replies
Last Post
illawgical
IS - 2nd Gen (2006-2013)
10
08-08-07 12:05 PM