2014 IS-250 Remote Start with Factory keypad integration
05-27-15, 06:58 PM
#46
Driver School Candidate
Join Date: May 2015
Location: CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
02-14-16, 07:08 PM
#48
Had the IDatalink ALCA module installed in my 2014 IS350 with Nav this weekend. Only snag the installer hit was that the iDatalink database gave them a warning that they didn't support the navigation models. We decided to try it anyway and it works perfectly.
All told, it cost me about $175 including the module, installation, and a V1 hardwire install. Couldn't be happier.
All told, it cost me about $175 including the module, installation, and a V1 hardwire install. Couldn't be happier.
02-15-16, 05:26 AM
#49
Driver
Join Date: Feb 2007
Location: Mo
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Had the IDatalink ALCA module installed in my 2014 IS350 with Nav this weekend. Only snag the installer hit was that the iDatalink database gave them a warning that they didn't support the navigation models. We decided to try it anyway and it works perfectly.
All told, it cost me about $175 including the module, installation, and a V1 hardwire install. Couldn't be happier.
All told, it cost me about $175 including the module, installation, and a V1 hardwire install. Couldn't be happier.
02-15-16, 11:01 PM
#50
Driver School Candidate
Join Date: May 2015
Location: New York
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2015 is350 f sport and I have remote start built into the car from the factory with the stock key fob. Has anyone actually tried to start the car with the key fob? You have to press the lock button 3 or 4 times and the last time hold it for a few seconds. Your hazards should flash about 3 times and the engine will start up
Last edited by hellrazer4; 02-15-16 at 11:21 PM.
02-15-16, 11:39 PM
#51
I have a 2015 is350 f sport and I have remote start built into the car from the factory with the stock key fob. Has anyone actually tried to start the car with the key fob? You have to press the lock button 3 or 4 times and the last time hold it for a few seconds. Your hazards should flash about 3 times and the engine will start up
02-16-16, 07:51 PM
#53
Yes, it uses the factory key fob.
The module can be programmed for different button sequences. I did lock-lock-lock which is the standard Lexus factory remote start sequence. One nice thing is that I don't need to hold the third push as on our RXes, just push the lock button three times and it starts right up.
The module can be programmed for different button sequences. I did lock-lock-lock which is the standard Lexus factory remote start sequence. One nice thing is that I don't need to hold the third push as on our RXes, just push the lock button three times and it starts right up.
02-16-16, 09:16 PM
#54
Rookie
Join Date: Aug 2015
Location: CA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2015 is350 f sport and I have remote start built into the car from the factory with the stock key fob. Has anyone actually tried to start the car with the key fob? You have to press the lock button 3 or 4 times and the last time hold it for a few seconds. Your hazards should flash about 3 times and the engine will start up
02-16-16, 11:48 PM
#55
Installed it in my 2014 350 fsport without a problem
http://vid1231.photobucket.com/album...psqycf2yji.mp4
http://vid1231.photobucket.com/album...psqycf2yji.mp4
02-17-16, 09:43 AM
#57
Driver School Candidate
Join Date: May 2015
Location: New York
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
02-17-16, 06:12 PM
#58
For my 2014 IS350 (no Enform), the entire installation was handled without any dealer involvement. The iDatalink module was programmed and installed by an third party.
