eBay VIPMotoz LED Headlights
#31
Driver School Candidate
Join Date: Jul 2015
Location: Texas
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Another VIP Motoz buyer with condensation reporting in! However, mine is only on the driver side and wasn't sealed correctly so soap/water is currently screwing my headlights as we type! I already contacted them and they reminded me about the warranty but they are currently out of the headlights This situation really sucks because I personally dont trust myself to take off my front bumper and replace the headlights myself. So this whole thing will still probably cost around $600. Not to mention I had XPel installed on the headlight to provide it some extra protection (I know this doesn't relate to the condensation, I just need to rant).
#32
Another VIP Motoz buyer with condensation reporting in! However, mine is only on the driver side and wasn't sealed correctly so soap/water is currently screwing my headlights as we type! I already contacted them and they reminded me about the warranty but they are currently out of the headlights This situation really sucks because I personally dont trust myself to take off my front bumper and replace the headlights myself. So this whole thing will still probably cost around $600. Not to mention I had XPel installed on the headlight to provide it some extra protection (I know this doesn't relate to the condensation, I just need to rant).
#33
Driver School Candidate
Join Date: Jul 2015
Location: Texas
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I'm not living in NY but i do wash my car at least 3 times a week. I never have any condensation problem. I must stated out that i don't use the seal that come with HID kit cause i think it's wasn't good enough to seal up everything.
Any way, i could be a lucky customer!!!!
Any way, i could be a lucky customer!!!!
#34
Driver School Candidate
Join Date: Oct 2014
Location: Arizona
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know if these headlights have awant adjustments for the projectors? Mine are aiming super low and I can't seem to find an adjusted anywhere with them installed on my car
#36
#37
Driver School Candidate
I ended up going ahead and purchasing these headlights for my 2011 and these are 100% compatible with our models without any modification. I had the standard halogen headlights before upgrading and these fit perfectly in case anyone else was interested. I also got much better light output compared to the factory projector and I don't have any condensation issues.
#38
I ended up going ahead and purchasing these headlights for my 2011 and these are 100% compatible with our models without any modification. I had the standard halogen headlights before upgrading and these fit perfectly in case anyone else was interested. I also got much better light output compared to the factory projector and I don't have any condensation issues.
Glad you see another positive response, the light output is definitely better than stock!
What part of NY are you from. We should def link up! Not a lot of is here at all.
#39
Pole Position
iTrader: (5)
I use white marine sealant. i bought it at Home Depot
something like this
http://www.walmart.com/ip/21014810?w...874511&veh=sem
something like this
http://www.walmart.com/ip/21014810?w...874511&veh=sem
#41
Driver School Candidate
#43
Yes! They showcased a video explaining which wire needs to be required in order to run as DLR.
I would link you however my work network blocks social media.
If you go on their website or if you look up WHITEBEAST on his post for his review with VIP motoz, I believe he posted a video as well. Just look up his username and see the threads he started.
What I did was I Just drive in ACC mode for my lights during the day time and turn on my headlights when need be.
#45
Just received mine and installed them today! I am absolutely satisfied with my purchase and VIPMOTOZ are a legit company with great services. BUT I have one question to those who own these headlights, one side of my headlight is aimed very low, does anyone know where to adjust the beams height and which way to turn? Pls and thank you! Would like an answer before i do it tomorrow night!