Building an IS350 6MT
#33
The only real way to know would be to try. That's why I was saying you should perhaps ask the guy in Australia, he's the only person I know of that has done the swap into a car that didn't originally have VDIM.
I suspect that the ECU will likely be fine with or without it, but there's no way to know for sure without trying. It's just not possible.
Sorry.
If you wanted to do it a surefire way, just make sure you swap in the components required for VDIM to function as well as the engine. That's another project though.
Jeff
I suspect that the ECU will likely be fine with or without it, but there's no way to know for sure without trying. It's just not possible.
Sorry.
If you wanted to do it a surefire way, just make sure you swap in the components required for VDIM to function as well as the engine. That's another project though.
Jeff
#37
Pressure plate and engine computer showed up yesterday and I have converted the wiring harnesses to work with the new electronics. Just need to remove the extra transmission connectors on the engine harness and re-tape some of the older sections.
Jeff
Jeff
Last edited by Jeff Lange; 12-13-19 at 10:04 AM.
#38
Racer
iTrader: (2)
Pressure plate and engine computer showed up yesterday and I have converted the wiring harnesses to work with the new electronics. Just need to remove the extra transmission connectors on the engine harness and re-tape some of the older sections.
http://jeff.supramania.com/is250/2gr...ap/wiring1.jpg
http://jeff.supramania.com/is250/2gr...new_parts1.jpg
http://jeff.supramania.com/is250/2gr...ure_plate1.jpg
Jeff
http://jeff.supramania.com/is250/2gr...ap/wiring1.jpg
http://jeff.supramania.com/is250/2gr...new_parts1.jpg
http://jeff.supramania.com/is250/2gr...ure_plate1.jpg
Jeff
Last edited by Jeff Lange; 11-28-15 at 12:03 PM.
#43
Racer
iTrader: (2)
I hope you don't mind asking to many questions Jeff but I believe that perhaps I m the only one who is really interested in this project.Do you know how much this reprogram will cost?One more question is if you just bought the 350 engine or did you buy the auto transmission also?Danny from Australia (I manage to find him)told me something about changing the auto gearing to manual but I didn't quite understand.How much did the 350 engine cost you if you don't mind me asking?
Last edited by Jeff Lange; 12-29-15 at 11:01 PM.
#44
I hope you don't mind asking to many questions Jeff but I believe that perhaps I m the only one who is really interested in this project.Do you know how much this reprogram will cost?One more question is if you just bought the 350 engine or did you buy the auto transmission also?Danny from Australia (I manage to find him)told me something about changing the auto gearing to manual but I didn't quite understand.How much did the 350 engine cost you if you don't mind me asking?