Bigger factory rotors for is350?
05-17-15, 08:35 AM
#4
No, not unless you also swap out the calipers too.
Now, I have yet to try this out, but this is a completely stock "kit" that I'd hope would work on our IS350 hubs. Don't have any confirmations on if the rotors fit on the hub and if the calipers simply bolt-up to our existing knuckles; but after some research, the knuckles of the two vehicles do appear the same.
https://www.clublexus.com/forums/sus...0-f-sport.html
Now, I have yet to try this out, but this is a completely stock "kit" that I'd hope would work on our IS350 hubs. Don't have any confirmations on if the rotors fit on the hub and if the calipers simply bolt-up to our existing knuckles; but after some research, the knuckles of the two vehicles do appear the same.
https://www.clublexus.com/forums/sus...0-f-sport.html
05-17-15, 10:12 AM
#5
No, not unless you also swap out the calipers too.
Now, I have yet to try this out, but this is a completely stock "kit" that I'd hope would work on our IS350 hubs. Don't have any confirmations on if the rotors fit on the hub and if the calipers simply bolt-up to our existing knuckles; but after some research, the knuckles of the two vehicles do appear the same.
https://www.clublexus.com/forums/sus...0-f-sport.html
Now, I have yet to try this out, but this is a completely stock "kit" that I'd hope would work on our IS350 hubs. Don't have any confirmations on if the rotors fit on the hub and if the calipers simply bolt-up to our existing knuckles; but after some research, the knuckles of the two vehicles do appear the same.
https://www.clublexus.com/forums/sus...0-f-sport.html
Thread
Thread Starter
Forum
Replies
Last Post
lexusis07
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
6
04-29-13 12:19 PM
superduner
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
18
08-30-09 10:38 PM