So what's the consensus on Linea wheels?
#46
Racer
iTrader: (7)
Incorrect. Linea Corse will sell replacement wheels by single pieces. That is never an issue if the wheel is in stock at the time.
From what Wheeldude seems to state, cracked wheels under warranty can occur after their inspection the wheel. "if you have an issue considered to be a manufacture defect, its covered for the life of the wheel, as long as you don't smack a curb at a high speed or drive over a big pothole" .
From what Wheeldude seems to state, cracked wheels under warranty can occur after their inspection the wheel. "if you have an issue considered to be a manufacture defect, its covered for the life of the wheel, as long as you don't smack a curb at a high speed or drive over a big pothole" .
#47
Lexus Champion
iTrader: (13)
I have the same objective like you do when looking for wheels: light, durable, affordable with addition to style. I narrow down my choices to lightweight Enkei, and TSW.
I'm curious what is your final picks
I'm curious what is your final picks
I really don't know how to answer that. I had three paragraphs typed out and erased them
Soliciting opinions is a reasonable place to start your research, which the OP did. I guess then you filter the opinions based on who/how they are written. I also did some searches for reliable/durable wheels etc., top 10 lists of those and tried to find manufacturers on several lists. But that is partly because reliability was important to me since I was looking for wheels lighter than the avg alloy wheel, and "light" and "durable" and "inexpensive" don't go together too well.
Soliciting opinions is a reasonable place to start your research, which the OP did. I guess then you filter the opinions based on who/how they are written. I also did some searches for reliable/durable wheels etc., top 10 lists of those and tried to find manufacturers on several lists. But that is partly because reliability was important to me since I was looking for wheels lighter than the avg alloy wheel, and "light" and "durable" and "inexpensive" don't go together too well.
#48
Almost went with Konig Lace. Affordable and light, but decided I had questions on durability and a couple of reviews that said it looked better in the pics than in person. Konig might be fine durability wise, but they don't have people lining up to testify to the durability.
It basically came down to that or Enkei. I simply couldn't find something I thought would be better than rpf1. There is nothing I could find (other than Konig Lace) close to the weight that wasn't substantially more expensive. When I found someone in Canada with a decent price and decent shipping cost, I spent the money. Lower prices in the states, but after adding shipping and knowing the hidden brokerage fees UPS/Fedex etc. put on ground shipping, the price rises substantially.
I see you have TSW. They seem to sell a fair number, prices were good and seemed to have relatively few complaints. I know I looked at their wheels but declined because of weight or offset or I couldn't find a design I liked with the right offset/width/weight. Most manu. don't actually publish weight specs for each wheels, at least not that I could find, and it really slows you down if you have to send an email about EVERY wheel your interested in.
In case you are interested, I started looking for rims about 10 mo. ago. Wasn't in a great hurry because I wasn't going to put them on for winter anyway, but bought them sometime late last year. Only got around to purchasing the front tires last week. The rears are on the car. The fronts I got back yesterday, but they aren't on the car yet. Weekend work. Got a friend to mount the tires on the rims at work, but they aren't a tire shop, so I couldn't pull the car in and ask them to do it on the spot. Not for free anyway
It basically came down to that or Enkei. I simply couldn't find something I thought would be better than rpf1. There is nothing I could find (other than Konig Lace) close to the weight that wasn't substantially more expensive. When I found someone in Canada with a decent price and decent shipping cost, I spent the money. Lower prices in the states, but after adding shipping and knowing the hidden brokerage fees UPS/Fedex etc. put on ground shipping, the price rises substantially.
I see you have TSW. They seem to sell a fair number, prices were good and seemed to have relatively few complaints. I know I looked at their wheels but declined because of weight or offset or I couldn't find a design I liked with the right offset/width/weight. Most manu. don't actually publish weight specs for each wheels, at least not that I could find, and it really slows you down if you have to send an email about EVERY wheel your interested in.
In case you are interested, I started looking for rims about 10 mo. ago. Wasn't in a great hurry because I wasn't going to put them on for winter anyway, but bought them sometime late last year. Only got around to purchasing the front tires last week. The rears are on the car. The fronts I got back yesterday, but they aren't on the car yet. Weekend work. Got a friend to mount the tires on the rims at work, but they aren't a tire shop, so I couldn't pull the car in and ask them to do it on the spot. Not for free anyway
#49
Lexus Champion
iTrader: (13)
Another reason i bought the TSW Nurburgring is because they are confirmed lightweight both by manufacturer and on the scale by the seller Need4Speed.
18x8.5 @ 19.5 lbs and 18x9.5 @ 21.05 lbs which is so much lighter than the OEM @ 28.5 lbs or so. The total 33 lbs unsprung mass saving does make acceleration and braking so much smoother.
TSW do list a lot of weight info for their wheels, example of the one i bought:
http://www.tsw.com/alloy_wheels_nurburgring.php
I like the Enkei and Konig too and you speak my thinking about them as well. Haha, somehow we have very similar choices.
18x8.5 @ 19.5 lbs and 18x9.5 @ 21.05 lbs which is so much lighter than the OEM @ 28.5 lbs or so. The total 33 lbs unsprung mass saving does make acceleration and braking so much smoother.
TSW do list a lot of weight info for their wheels, example of the one i bought:
http://www.tsw.com/alloy_wheels_nurburgring.php
I like the Enkei and Konig too and you speak my thinking about them as well. Haha, somehow we have very similar choices.
#50
Driver School Candidate
Join Date: Jul 2013
Location: Amman
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Lots of great info in that thread!
May i ask if anyone ever tried or heard any good/bad info about ESM wheels? considering to run their LM rep in 18s as they have decent offsets to offer.
May i ask if anyone ever tried or heard any good/bad info about ESM wheels? considering to run their LM rep in 18s as they have decent offsets to offer.
#51
Lexus Test Driver
#52
Driver School Candidate
Join Date: Jul 2013
Location: Amman
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
they are not the top quality wheels discussed and a full set can be had for >800 but my buddy has 2 sets for his beemer and swears by them. Maybe because they only come in the size and style he wants but to my knowledge he never has any issues with wheel failures. Its on his DD E36. He is the most calm driver i know and doesnt do any of off road racing so thats why they hold up so well
#53
Lexus Test Driver
18's is actually the more popular size when it comes to rims. Im sure if you keep looking you will find something good. What is your budget and maybe we can recommend some brands to look at
#54
Driver School Candidate
Join Date: Jul 2013
Location: Amman
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
the huge problem is international shipping ive been quoted 500$ to ship a set of wheels to my destination.
So keeping shipping aside my budget would be around 900 - 1000$. My aim is to have something tucked in a tiny bit to preserve and avoid any tire stretch. And of course avoid any fender rolling / cutting clips etc..
So keeping shipping aside my budget would be around 900 - 1000$. My aim is to have something tucked in a tiny bit to preserve and avoid any tire stretch. And of course avoid any fender rolling / cutting clips etc..
#55
Racer
iTrader: (9)
the huge problem is international shipping ive been quoted 500$ to ship a set of wheels to my destination.
So keeping shipping aside my budget would be around 900 - 1000$. My aim is to have something tucked in a tiny bit to preserve and avoid any tire stretch. And of course avoid any fender rolling / cutting clips etc..
So keeping shipping aside my budget would be around 900 - 1000$. My aim is to have something tucked in a tiny bit to preserve and avoid any tire stretch. And of course avoid any fender rolling / cutting clips etc..
#56
Driver School Candidate
Join Date: Jul 2013
Location: Amman
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Doubt theyll have 18x8.5 but hope theyll do. It looks like a nice wheel. Wish i can run 19s.
But road conditions here are horrible
#57
Racer
iTrader: (5)
As it stands, currently the least aggressive sizing they have in the ES2 is 18x9.5 +30. Great for the rear, not so much for the front lol
#58
Driver School Candidate
Join Date: Jul 2013
Location: Amman
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
They will likely have that sizing, and you can get them to machine the back pad to raise the offset I believe, but it does cost extra to do that.
As it stands, currently the least aggressive sizing they have in the ES2 is 18x9.5 +30. Great for the rear, not so much for the front lol
As it stands, currently the least aggressive sizing they have in the ES2 is 18x9.5 +30. Great for the rear, not so much for the front lol
#59
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2014
Location: CA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Another reason i bought the TSW Nurburgring is because they are confirmed lightweight both by manufacturer and on the scale by the seller Need4Speed.
18x8.5 @ 19.5 lbs and 18x9.5 @ 21.05 lbs which is so much lighter than the OEM @ 28.5 lbs or so. The total 33 lbs unsprung mass saving does make acceleration and braking so much smoother.
TSW do list a lot of weight info for their wheels, example of the one i bought:
http://www.tsw.com/alloy_wheels_nurburgring.php
I like the Enkei and Konig too and you speak my thinking about them as well. Haha, somehow we have very similar choices.
18x8.5 @ 19.5 lbs and 18x9.5 @ 21.05 lbs which is so much lighter than the OEM @ 28.5 lbs or so. The total 33 lbs unsprung mass saving does make acceleration and braking so much smoother.
TSW do list a lot of weight info for their wheels, example of the one i bought:
http://www.tsw.com/alloy_wheels_nurburgring.php
I like the Enkei and Konig too and you speak my thinking about them as well. Haha, somehow we have very similar choices.
#60
Another reason i bought the TSW Nurburgring is because they are confirmed lightweight both by manufacturer and on the scale by the seller Need4Speed.
18x8.5 @ 19.5 lbs and 18x9.5 @ 21.05 lbs which is so much lighter than the OEM @ 28.5 lbs or so. The total 33 lbs unsprung mass saving does make acceleration and braking so much smoother.
TSW do list a lot of weight info for their wheels, example of the one i bought:
http://www.tsw.com/alloy_wheels_nurburgring.php
I like the Enkei and Konig too and you speak my thinking about them as well. Haha, somehow we have very similar choices.
18x8.5 @ 19.5 lbs and 18x9.5 @ 21.05 lbs which is so much lighter than the OEM @ 28.5 lbs or so. The total 33 lbs unsprung mass saving does make acceleration and braking so much smoother.
TSW do list a lot of weight info for their wheels, example of the one i bought:
http://www.tsw.com/alloy_wheels_nurburgring.php
I like the Enkei and Konig too and you speak my thinking about them as well. Haha, somehow we have very similar choices.
I got lucky and the next nice looking set that would fit was my TSWs. They happen to fit PERFECT and I got them for $1000 with almost new tires and TPMS sensors. I ended up replacing the tires though because they were 45 series.