When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
how can i fit the led drl decoder inside the cover?
Hello! guys i have a problem.
so i installed the LED DRL and it works but the problem is that i cant fit the decoder inside the cover.
what did you guys do?
thanks!
Wedge it in between the light and the housing and it'll go right in and sit right inside... Dont be afraid to give it a little push when I had mine thats what I did. There's plenty of room right inside the housing underneath the high beams
I broke the case off and wrap mine with electrical tape.
I did the same thing after relentlessly trying to make the entire decoder fit inside the housing. It's been several months since the install and everything is still working perfectly.
i made a little cut on the cover to let the wires slide through the cover. i tried pushing it in, but i had auto leveling headlights and it wouldn't let the lights go down as it was in the way when i pushed it into the housing.
I heard thats bad. it will fog up your headlights lol
Yah I figured. I am gonna crack the boxes open and just e-tape it and stuff them in. I just hate to take all that crap off just to get to them ...I did forget to install my polarg city lights so it has to be done anyway
i made a little cut on the cover to let the wires slide through the cover. i tried pushing it in, but i had auto leveling headlights and it wouldn't let the lights go down as it was in the way when i pushed it into the housing.
06-11-14, 12:19 AM
...I did forget to install my polarg city lights so it has to be done anyway
