Gville350

iTrader: (10)

Found 2 sets of mine from one seller on Craigslist. Only purchased the cheaper set though.

devo2nr

I am looking into doing this but dont want to take the tpms off my oem wheels. Is this link accurate? I cant imagine the TPMS being this cheap!

Gville350

iTrader: (10)

^That link is just for the valve kit, which is the small parts that get used inside of the valve stem. It is recommended to replace these items each time you replace the tires.

devo2nr

awesome thanks. Does that hyper silver match the oem color? I really like the finish of the Genesis wheels but need to clean up some rash on mine so I will be respraying.

Gville350

iTrader: (10)

Hyper silver is not a match to the factory OEM Lexus wheel color or the Genesis wheel color; however, it is close and love how mine turned out with a DIY paint job.

devo2nr

can you elaborate on what you did in this photo? I thought i mimicked what you did but my centercaps are not centered in the wheels, they are offset.

Gville350

iTrader: (10)

^I'll try.

1) Remove the outer lip on the actual cap to ensure the cap sits flush against the wheel once step #2 is also completed.
2) Clearance each one of the tabs narrowing down the amount of "wedge" so that the tabs can clear the wheel's center hub and "lock" in behind the wheel. Basically grind away the plastic until even with the "C-clip" of each cap.

Hope this makes sense and is helpful!

kennytbone

Those look awesome! I just purchased a set of these for my Sonata but now I'm thinking of putting them on the IS instead. Or maybe I'll find another set and do a square setup on both.

Gville350

iTrader: (10)

^See, that's what I've been thinking of doing myself (19x8.5s all around); but magically these things are now impossible to find! LOL!

kennytbone

Gville350: PM sent.

02camryle

iTrader: (1)

[QUOTE=Gville350;8507156]



[QUOTE]

wow this pic and fitment look sosick, makeme wna buy these wheels lol
anybody knows the tire sizes ofthis one

Maladore

sorry if this is a noob question.. cuz i am a noob lol

You're running 235/35/19 tires.. but the rims are 225/40/19?

So you have 4 x rims of 225/40/19? Or you're running the staggered setup of 225/40/19 F, 245/40/19 R?

I have AWD and would LOVEE this for my winter setup.

Thanks!

kennytbone

All those numbers are tire sizes. Wheels are measured in diameter, width, and bolt pattern. These wheels are 19" diameter by 8" wide in front and 19" diameter by 8.5" wide in rear and will accept a partially overlapping range of tire widths. The 8" wide wheel will (ideally) accept tires between 215mm and 245mm wide and the 8.5" wheel will (ideally) accept tires between 225mm and 255mm wide.

So one could run 235 tires on all four wheels or 225s in front and 245s in rear.

DnkNgs

I have a set for sale in northern va. 700 cash pick up only for now.


Less than 3k miles on them. Just need them gone.

Text me at 571-235-eight three one three for pics

DnkNgs

[QUOTE=02camryle;9414630][QUOTE=Gville350;8507156]





I HAVE A SET FOR SALE IF YOU ARE INTERESTED. EXCELLENT CONDITION AND I AM IN SPRINGFIELD VA. LET ME KNOW.