Meth injection - Club Lexus Forums

Go Back   Club Lexus Forums > Lexus Model Forums > IS Models > IS - 2nd Gen (2006-2013)
Log In 

Meth injection

Thread Tools Search this Thread
Old 07-29-13, 01:11 PM   #1
Trader Score: (0)
Join Date: May 2013
Location: Ca
Posts: 189
Default Meth injection

has anyone successfully installed one without problems?

if so i would gladly buy one

and if you have where did you buy it and how much
Surf247 is offline   Reply With Quote
Old 07-29-13, 02:48 PM   #2
Pole Position
Trader Score: (0)
Join Date: Jun 2012
Location: WA
Posts: 373

Originally Posted by HKS350 View Post
Food for Thought !!

The ISx50 ECU

When injector duty cycle is increased, timing is pulled.

The Toyota ECU also check the rate of rotation VIA cam/crank speed/RPM.

If the ECU see's a large gain in assembly speed it pulls timing.

Example: Normally at WOT the cars running through the RPM's at a normal pace. The timing map falls as the injector duty rises.

OK, so now you have wheels spin (traction off), motor speed rises faster through the RPM's. ECU see's change and moves your timing ACC to another point in the map. This is called 3D mapping.
Now your wheel spin stops mid RPM range and your car now bogg's and feels slower until the next gear change.

Reason: Vehicle speed is reduced, Timing is reduced and now your at a lower map point than design for good/great performance.

So let's look at the layers of mapping on the Stock ECU

Rotation of assembly VIA /CAM/ Crank
A/F ratio
Tranmission speed
Air Flow /MAP
Water temp
Intake Air temp
Throttle POS

I'm leaving out about 3 more that are just to hard to explain without showing.

Now take these various maps and overlay them in a 3D format. (Think joy stick motion) Letting all of them work as one map. If one point changes then the map changes all the other points to keep perfomance SAFE!

Throw Meth injection into the mix. What do you think the ECU will do?
And what is your view of the change it will make? Make a 10% decrease in intake air temp. What happens to the map? Keep in mind the factory tune is already perfect 100%

**My thoughts** The only way to gain performance is to get outside the factory ECU mapping, your performance mod must be a greater gain then what the mapping will allow for.

#1 - Boost
#2- Nitrous

**My point to the rant** Your gain will only be what is already locked inside your ECU. The gain is already there, all your doing is moving the DOT around on the map.
vapid2323 is offline   Reply With Quote
Old 07-29-13, 03:02 PM   #3
Trader Score: (0)
Join Date: May 2013
Location: Ca
Posts: 189

thank you much
Surf247 is offline   Reply With Quote
Old 07-29-13, 06:40 PM   #4
Lexus Fanatic
Trader Score: (10)
Gville350's Avatar
Join Date: Mar 2011
Location: South Carolina
Posts: 7,935
'06 IS350 - 8.6468 @ 81.81MPH
Mods - SRI, BCRs, full GFX kit
Gville350 is offline   Reply With Quote

Similar Threads
Thread Thread Starter Forum Replies Last Post
IL WTB: Black Carpet! silver470 SC400 / 300 Classifieds 3 05-14-15 02:07 PM
ODBII reader ISFFF IS F (2008-2014) 2 09-10-13 07:53 AM
ebay Surf247 IS - 2nd Gen (2006-2013) 14 06-05-13 07:47 PM
GS430 or GS350. Which one would you buy? DaCajun GS - 3rd Gen (2006-2011) 19 04-06-07 11:19 PM
RMM or L-Sportline Side Skirt LexCiting GS - 2nd Gen (1998-2005) 16 01-12-04 05:44 PM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

All times are GMT -7. The time now is 10:10 AM.

Copyright © 2000-2015 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS