anyone got ebay rear diffuser install on their IS??
#18
Driver
iTrader: (2)
Join Date: Aug 2010
Location: va
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
I have a replica version of this diffuser bought off of another member whom i believe got it from ebay. Id say the fitment was a 6/10 until i took it to my shop and they melted the crap out of it with a heat gun. after all of the work id say the fitment was at an 8/10. If youre like me and every little ding/imperfection on the car annoys you, id suggest either commit to bonding it to your bumper or simply going a different route.
P.S the fitment was at an 8/10 AFTER i put 4 holes into it and nailed the thing to my car.
P.S the fitment was at an 8/10 AFTER i put 4 holes into it and nailed the thing to my car.
#19
Driver
iTrader: (2)
Join Date: Aug 2010
Location: va
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
I have a replica version of this diffuser bought off of another member whom i believe got it from ebay. Id say the fitment was a 6/10 until i took it to my shop and they melted the crap out of it with a heat gun. after all of the work id say the fitment was at an 8/10. If youre like me and every little ding/imperfection on the car annoys you, id suggest either commit to bonding it to your bumper or simply going a different route.
P.S the fitment was at an 8/10 AFTER i put 4 holes into it and nailed the thing to my car.
P.S the fitment was at an 8/10 AFTER i put 4 holes into it and nailed the thing to my car.
#20
Driver
iTrader: (2)
Join Date: Aug 2010
Location: va
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
on a side note, if anyone is in the northern virginia area and is willing to drive to either my house/work to pick it up, ill give you my old s4play diffuser for free. condition is 7/10 but once on the car you dont notice so it looks great.
#21
Driver School Candidate
I was looking at maybe getting one... tempting lol
#23
Just ordered mine for my wife's IS along with a front lip this morning. Her car is breakwater blue so im thinking of painting the lips black and using black silicone sealant to help with the gaps.
http://www.ebay.com/itm/2006-2011-Lexus-IS250-IS350-Sedan-JDM-Black-Shark-Fin-Polyurethane-Rear-Diffuser-/370846248932?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AIS250&hash=item565828afe4&vxp=mtr
http://www.ebay.com/itm/2006-2011-Lexus-IS250-IS350-Sedan-JDM-Black-Shark-Fin-Polyurethane-Rear-Diffuser-/370846248932?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AIS250&hash=item565828afe4&vxp=mtr
#24
Driver School Candidate
Join Date: Apr 2014
Location: SK
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
What kind of paint you did?
#25
Driver School Candidate
Join Date: Jul 2014
Location: florida
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ecordoba47
i have a 2014 Lexus is250 F Sport, wanted to do some modifications: like add a different exhaust that would give me a double pipes each side, in other words Quad tips(apologize if my wording is incorrect), also would like to increase the Horsepower??
do i need a rear diffuser for this?
anyone know where i can purchase these parts if available?
appreciate your input.
do i need a rear diffuser for this?
anyone know where i can purchase these parts if available?
appreciate your input.
#28
Lead Lap
iTrader: (8)
i think i actually screwed mine in around the middle section just to keep it in place while the silicon adhesive dried on the edges. then i removed the screws and just filled those two spots and sanded down.
also held the areas where it was not flat to the bumper ( leaned a padded cement block ) so when the adhesive dried, it bonds to that section.
hope that helps.
also held the areas where it was not flat to the bumper ( leaned a padded cement block ) so when the adhesive dried, it bonds to that section.
hope that helps.
#30
Driver School Candidate
Join Date: Jul 2015
Location: utah
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts