Install Mesh Grill
#1
Pole Position
Thread Starter
Install Mesh Grill
I have a 2008 IS250 and don't like chrome at all so I just bought this grill from ebay check it out. I'm thinking about blacking the chrome out to match the new grill.
http://www.ebay.com/itm/170852885569...84.m1439.l2649
My question is how do I go about installing it the easiest way please excuse the question for all you pro's out their. I'm used to working on car and I'm sure I would figure it out but I thought it would ask first. I don't want to break something that I will have to replace later. Has anyone ever installed this before and how? Pictures would be great.
http://www.ebay.com/itm/170852885569...84.m1439.l2649
My question is how do I go about installing it the easiest way please excuse the question for all you pro's out their. I'm used to working on car and I'm sure I would figure it out but I thought it would ask first. I don't want to break something that I will have to replace later. Has anyone ever installed this before and how? Pictures would be great.
#2
Moderator
iTrader: (16)
to install the grill.. direction is as follows..
- pop the hood
- pull the rubber weather stripping off.. they are held down with a bunch of plastic plugs.. if the plugs come apart from the weather stripping its ok.. just take a pair of needle nose plyers pull them out of the hole on the car.. youll see little holes on the weather stripping.. stick one side of the T bar and strech the rubber until the other side goes in.
- unscrew the center hex bolt
- pop off any plastic screws u see holding down the grill.. to take the plastic screws out.. take ur fingernail and pull the center up.. then pull the whole screw out.
- slide out the chrome trim.. then slide out the grill..
- reverse the process to put it back together..
hope this helps
- pop the hood
- pull the rubber weather stripping off.. they are held down with a bunch of plastic plugs.. if the plugs come apart from the weather stripping its ok.. just take a pair of needle nose plyers pull them out of the hole on the car.. youll see little holes on the weather stripping.. stick one side of the T bar and strech the rubber until the other side goes in.
- unscrew the center hex bolt
- pop off any plastic screws u see holding down the grill.. to take the plastic screws out.. take ur fingernail and pull the center up.. then pull the whole screw out.
- slide out the chrome trim.. then slide out the grill..
- reverse the process to put it back together..
hope this helps
#4
Is that the matching lower grille you have as well? Also, if I have a black pearl emblem, would I just lay that with the doubled sided tape on top of the L that this grille comes with?
#6
Trending Topics
#10
Driver School Candidate
Join Date: Sep 2012
Location: Ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Is there 2 separate ISF grilles, one that can have the emblem removed and the other you cant?
That's what it looks like from the eBay pictures
http://item.mobileweb.ebay.com/viewi...id=79237379388
http://item.mobileweb.ebay.com/viewi...d=170852885569
That's what it looks like from the eBay pictures
http://item.mobileweb.ebay.com/viewi...id=79237379388
http://item.mobileweb.ebay.com/viewi...d=170852885569
#12
#13
Pole Position
Thread Starter
So I installed the new grill looks FN nice everything was reused included the Emblem just be careful and cut it out with a blade. I'll post some pic's soon
#14
Lead Lap
iTrader: (2)
#15
Instructor
iTrader: (8)
Is there 2 separate ISF grilles, one that can have the emblem removed and the other you cant?
That's what it looks like from the eBay pictures
http://item.mobileweb.ebay.com/viewi...id=79237379388
http://item.mobileweb.ebay.com/viewi...d=170852885569
That's what it looks like from the eBay pictures
http://item.mobileweb.ebay.com/viewi...id=79237379388
http://item.mobileweb.ebay.com/viewi...d=170852885569