IS-F style rear bumper on IS250
#1
Rookie
Thread Starter
Join Date: May 2011
Location: australia
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
IS-F style rear bumper on IS250
Anyone added IS-F style rear bumper to IS250/IS350?
They're on ebay.
I'm interested, but want to add an exhaust afterwards and wondering if anyones done that combination / how they got the tips to match up with the IS-F bumper tips
They're on ebay.
I'm interested, but want to add an exhaust afterwards and wondering if anyones done that combination / how they got the tips to match up with the IS-F bumper tips
#2
Pit Crew
iTrader: (4)
Do you have the stock exhaust on right now?
Those ebay kits come with an elbow that you attach to the stock exhaust muffler tips after you cut/shorten the tips a bit. This will make the exhaust flow point downwards. The elbows probably won't fit an aftermarket exhaust but you can probably chop off the tips to that or just leave the tips attached and remove the fake ISF tips from the bumper so the aftermarket exahust might clear the bumper.
Those ebay kits come with an elbow that you attach to the stock exhaust muffler tips after you cut/shorten the tips a bit. This will make the exhaust flow point downwards. The elbows probably won't fit an aftermarket exhaust but you can probably chop off the tips to that or just leave the tips attached and remove the fake ISF tips from the bumper so the aftermarket exahust might clear the bumper.
#6
Lead Lap
iTrader: (7)
search function is your friend
https://www.clublexus.com/forums/is-...-my-is350.html
https://www.clublexus.com/forums/clu...250-350-a.html
https://www.clublexus.com/forums/is-...-progress.html
https://www.clublexus.com/forums/is-...oto-guide.html
https://www.clublexus.com/forums/is-...ar-bumper.html
https://www.clublexus.com/forums/is-...-my-is350.html
https://www.clublexus.com/forums/clu...250-350-a.html
https://www.clublexus.com/forums/is-...-progress.html
https://www.clublexus.com/forums/is-...oto-guide.html
https://www.clublexus.com/forums/is-...ar-bumper.html
Last edited by RDIS250AWD; 11-04-12 at 11:34 PM.
#7
Driver School Candidate
Join Date: Jun 2012
Location: ON
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
You'll have to cut about 3 inches off your tailpipe, so if you buy an expensive exhaust you have to cut the tips and it'll have no resale. So get a cheap one like M2 or just weld magnaflows on there.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
lowKut
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
0
09-03-15 01:53 PM