IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

E-brake barely holds

Thread Tools
 
Search this Thread
 
Old 06-16-12, 01:43 AM
  #1  
TookayS2K
Driver School Candidate
Thread Starter
 
TookayS2K's Avatar
 
Join Date: Nov 2010
Location: OH
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default E-brake barely holds

I've always had a problem with my e-brake on my 2010 is250 awd that I purchased new. The e-brake barely holds the car on an incline unless you put the pedal all the way down to the floor. I noticed other IS' that I've driven to have very strong e-brakes. The pedal itself feels much more stiff.

I've asked my dealer to look at this problem many times and all they do is tighten it a few clicks and they tell me it's in spec. Finally, I asked them to compare with a different IS that they had on the lot. Of course it was a night and day difference. They kept my car for a few days and I got a call saying it's because my 2010 ebrake system is different. It's just how the newer ones are designed and that it's normal to have to push it all the way down to the floor to hold the car.

He said the 2009 and lower models have different e-brake systems and that's why mine feels different. Can anybody confirm this?
Old 06-16-12, 02:13 AM
  #2  
kim0217
Lead Lap
iTrader: (8)
 
kim0217's Avatar
 
Join Date: Jan 2011
Location: 三番bay,CA
Posts: 627
Likes: 0
Received 0 Likes on 0 Posts
Default

my 07 really tight, my roomate's 2011 feel loose, but I think they hold it like the same
Old 06-16-12, 03:07 AM
  #3  
AtlantaGuy
Rookie
 
AtlantaGuy's Avatar
 
Join Date: Mar 2009
Location: Atlanta, GA
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TookayS2K
I've always had a problem with my e-brake on my 2010 is250 awd that I purchased new. The e-brake barely holds the car on an incline unless you put the pedal all the way down to the floor. I noticed other IS' that I've driven to have very strong e-brakes. The pedal itself feels much more stiff.

I've asked my dealer to look at this problem many times and all they do is tighten it a few clicks and they tell me it's in spec. Finally, I asked them to compare with a different IS that they had on the lot. Of course it was a night and day difference. They kept my car for a few days and I got a call saying it's because my 2010 ebrake system is different. It's just how the newer ones are designed and that it's normal to have to push it all the way down to the floor to hold the car.

He said the 2009 and lower models have different e-brake systems and that's why mine feels different. Can anybody confirm this?

My 2008 is the same way. Had the dealer adjust it about 6 months ago but it didn't really make any difference. I bought the car brand new and it has always been this way.

If I had to use it to stop for some reason, there is no way it would stop the car.
Old 06-16-12, 08:39 AM
  #4  
Hoovey689
Moderator
iTrader: (16)
 
Hoovey689's Avatar
 
Join Date: Oct 2008
Location: California
Posts: 42,283
Received 122 Likes on 82 Posts
Default

The e-brake/parking brake cable just needs to be tightened. see your local dealer hah
Old 06-16-12, 11:18 AM
  #5  
Sango
Pole Position
iTrader: (10)
 
Sango's Avatar
 
Join Date: Sep 2010
Location: Vancouver, BC / Seattle, WA
Posts: 3,382
Received 8 Likes on 6 Posts
Default

Shouldn't need to go all the way down. Close to 3/4 way more likely.
Old 06-16-12, 04:09 PM
  #6  
KillaIS250
Lexus Fanatic
iTrader: (1)
 
KillaIS250's Avatar
 
Join Date: Jan 2011
Location: 909, CA
Posts: 9,119
Likes: 0
Received 5 Likes on 5 Posts
Default

My 2007 is like that too - it won't really hold unless you put the pedal all the way down to the ground.

I've driven a couple other IS's and it was the same way....so I figured that's just how it was lol
Old 06-16-12, 04:49 PM
  #7  
isam250
Pole Position
iTrader: (7)
 
isam250's Avatar
 
Join Date: Aug 2006
Location: ca
Posts: 2,501
Received 17 Likes on 5 Posts
Default

https://www.clublexus.com/forums/att...adjustment.pdf
Old 06-17-12, 05:03 PM
  #8  
TookayS2K
Driver School Candidate
Thread Starter
 
TookayS2K's Avatar
 
Join Date: Nov 2010
Location: OH
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by kim0217
my 07 really tight, my roomate's 2011 feel loose, but I think they hold it like the same
Yeah... every other older IS that I've tested is real tight but my 2010 is pretty loose.

Originally Posted by AtlantaGuy
My 2008 is the same way. Had the dealer adjust it about 6 months ago but it didn't really make any difference. I bought the car brand new and it has always been this way.

If I had to use it to stop for some reason, there is no way it would stop the car.
Strange that yours is an 08 and the same... it seems all the 2010 and up are loose.


Originally Posted by Hoovey2411
The e-brake/parking brake cable just needs to be tightened. see your local dealer hah
Dealer adjusted it and said it's in spec. But we hopped in another IS and it was a night and day difference so he kept it another few days to check it out. He said it's because the pre-2010 had different E-brake systems. Not sure if this is true or not.



Originally Posted by KillaIS250
My 2007 is like that too - it won't really hold unless you put the pedal all the way down to the ground.

I've driven a couple other IS's and it was the same way....so I figured that's just how it was lol
I've noticed the opposite. All other IS' that I've driven have been significantly more tight.


do you think my dealer is adjusting shoe clearance and not pedal travel? I think this might be the problem
Old 06-18-12, 01:50 PM
  #9  
07Lex350
Driver School Candidate
 
07Lex350's Avatar
 
Join Date: Sep 2011
Location: ca
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default

Same here as well, all the way down.
Old 06-18-12, 02:14 PM
  #10  
shadowman
Lexus Champion
iTrader: (2)
 
shadowman's Avatar
 
Join Date: Jun 2010
Location: CA
Posts: 2,258
Likes: 0
Received 1 Like on 1 Post
Default

on my 2010 is250 RWD.... it needs to be ALL THE WAY down to hold the car.
Old 06-18-12, 02:34 PM
  #11  
kingster
Pole Position
 
kingster's Avatar
 
Join Date: Aug 2011
Location: CA
Posts: 250
Likes: 0
Received 0 Likes on 0 Posts
Default

Must push pedal all the way down when down/up hill. I always turn wheels in/outward.
What I really don't like when car parked up/downhill and put in gear, there is clank sound coming from transmission. Gear (R/D) doen not go in smoothly. I hate it!!
Old 06-18-12, 03:29 PM
  #12  
TookayS2K
Driver School Candidate
Thread Starter
 
TookayS2K's Avatar
 
Join Date: Nov 2010
Location: OH
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 07Lex350
Same here as well, all the way down.
Originally Posted by shadowman
on my 2010 is250 RWD.... it needs to be ALL THE WAY down to hold the car.
Originally Posted by kingster
Must push pedal all the way down when down/up hill. I always turn wheels in/outward.
What I really don't like when car parked up/downhill and put in gear, there is clank sound coming from transmission. Gear (R/D) doen not go in smoothly. I hate it!!

Good to know I'm not the only one! Doesn't make sense. Can anybody confirm what the dealership said about the e-brake systems being completely different pre-2009?

Also, it's not good to have your car stopping on your parking gear. My dealer actually said to me why should i be so concerned?? Nobody uses E-brakes anymore. lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
richrf
HS 250h Model (2010-2012)
51
10-01-12 08:43 PM
turboflgrl
IS - 2nd Gen (2006-2013)
9
08-21-12 05:54 PM
tella
LX - 3rd Gen (2008-2021)
8
03-03-11 07:20 AM
TR3XX
RX - 3rd Gen (2010-2015)
4
12-16-10 06:06 PM
Achilles11
ES - 5th Gen (2007-2012)
7
02-10-10 03:18 PM



Quick Reply: E-brake barely holds



All times are GMT -7. The time now is 10:26 AM.