Shark Fin...
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2012
Location: U.K
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Shark Fin...
Where can i purchase a dummy is250 Fin from?
also i have a Breakwater blue IS, do any fin's come in that colour or just in primer? seems a bit of hassle going to a garage to get such a small item painted..
cheers
also i have a Breakwater blue IS, do any fin's come in that colour or just in primer? seems a bit of hassle going to a garage to get such a small item painted..
cheers
#2
Lexus Fanatic
iTrader: (1)
Sewell sells it pre-painted, but its $115 + shipping (after Clublexus discount). Shipping might be pricey to the U.K.
Looks like it's part# 8676053020J0
You can find it here...
http://is.sewellparts.com/oem-catalo...S250-2007.html
They sell them on eBay for like $15-20 (not OEM). Might just be cheaper to buy one of those and paint it, paint shouldn't be expensive at all.
Looks like it's part# 8676053020J0
You can find it here...
http://is.sewellparts.com/oem-catalo...S250-2007.html
They sell them on eBay for like $15-20 (not OEM). Might just be cheaper to buy one of those and paint it, paint shouldn't be expensive at all.
Last edited by KillaIS250; 05-20-12 at 03:12 AM.
#4
Driver School Candidate
Thread Starter
Join Date: Feb 2012
Location: U.K
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Sewell sells it pre-painted, but its $115 + shipping (after Clublexus discount). Shipping might be pricey to the U.K.
Looks like it's part# 8676053020J0
You can find it here...
http://is.sewellparts.com/oem-catalo...S250-2007.html
They sell them on eBay for like $15-20 (not OEM). Might just be cheaper to buy one of those and paint it, paint shouldn't be expensive at all.
Looks like it's part# 8676053020J0
You can find it here...
http://is.sewellparts.com/oem-catalo...S250-2007.html
They sell them on eBay for like $15-20 (not OEM). Might just be cheaper to buy one of those and paint it, paint shouldn't be expensive at all.
Thank for the info...much appreciated
#5
Pole Position
iTrader: (2)
Join Date: Jul 2011
Location: g town
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Recently ordered from sewell, I see people complaining about shipping but I guess you didnt realize that once you put in your country and postal code theres 2 options..
Intl. Select (Incl. Duties/Taxes) $81.18
Standard Intl. Ground $34.57
When i boguht my gfx front, and rear I chose standard Intl. Ground and when it arrived I didnt have to pay duties, and taxes.
Hope that helps.
Intl. Select (Incl. Duties/Taxes) $81.18
Standard Intl. Ground $34.57
When i boguht my gfx front, and rear I chose standard Intl. Ground and when it arrived I didnt have to pay duties, and taxes.
Hope that helps.
#7
I would go after market not Sewell. It will have no functionality. Why pay so much when you can get something similiar for $12 and nobody will tell the difference.
http://www.ebay.com/itm/BMW-Shark-Fi...de5cf7&vxp=mtr
Pick blue
http://www.ebay.com/itm/BMW-Shark-Fi...de5cf7&vxp=mtr
Pick blue
Trending Topics
#8
hmm
iTrader: (1)
I would go after market not Sewell. It will have no functionality. Why pay so much when you can get something similiar for $12 and nobody will tell the difference.
http://www.ebay.com/itm/BMW-Shark-Fi...de5cf7&vxp=mtr
Pick blue
http://www.ebay.com/itm/BMW-Shark-Fi...de5cf7&vxp=mtr
Pick blue
#10
Great Deal Guru
iTrader: (5)
JDM Shark fin
I went through the same thing (I owe an 06 IS350 which were not equiped with the fin).
I looked at everything non JDM options on Ebay and decided against everything:
1) I wanted to make sure of the paint match
2) Paint quality (nothing compares to JDM)
3) Aftermarket sizes vs JDM?
4) Having to deal with now sending the fin out for painting or painting it myself.
I end up buying a JDM 3R1 used fin in perfect condition for $75 shipped.
You will need to remove the inner stuff from the JDM one if an 06 IS2XX / IS3XX and just use 3m
I have not installed it yet but will post pics when I do.
Just my $0.2
I looked at everything non JDM options on Ebay and decided against everything:
1) I wanted to make sure of the paint match
2) Paint quality (nothing compares to JDM)
3) Aftermarket sizes vs JDM?
4) Having to deal with now sending the fin out for painting or painting it myself.
I end up buying a JDM 3R1 used fin in perfect condition for $75 shipped.
You will need to remove the inner stuff from the JDM one if an 06 IS2XX / IS3XX and just use 3m
I have not installed it yet but will post pics when I do.
Just my $0.2
Thread
Thread Starter
Forum
Replies
Last Post